Table of Contents
Advertisement
Using
your
dryer
Selecting
the d_ying
process
There are two ways in which your dryer is able to dry clothes; AU_:O SENSING or TIME DRS:
Auto Sensing
When AUTO SENSING is selected AeroSmart automatically
senses
the dryness level of the load and turns off when the clothes
are dry. AemSmart's internal computer
measures the moisture
content
of the load using metal sensing bars and together
with a
temperature
sensor determines
when the clothes have reached
the selected dryness level (Refer to page 40).
For optimum
clothes care, match the cycle to the load. AUTO
SENSING often provides the best results and leads to lower
energy costs than TIME DRY.
Fig_45 Selecting Auto Sensing
Time Dry
There are three timed cycles You can choose
between
20,
40and
80 minutes.
A COOL DOWN period of 10 minutes
is
included
in the 80- minute
and 40--minute
cycb
The 20-minute
cycle has a 5---minute COOL DOWN period
To select a timed cycle, press the TIME DRY button. The AUTO
SENSING light will switch off. Now select the time you want your
dryer to run for. The load will continue
drying until the time you
have set has elapsed.
During TIME DR%the dryer does not sense when the clothes are
dry. This may cause over--drying.
We recommend
that you dry your clothes for a slightly shorter
time than you think they need, or check on them regularly (to
avoid over--drying).
T;rneDry
Fig,4d Selecting Xme Dr},,
Advertisement
Table of Contents
