Table of Contents
Advertisement
nsta ation
instructions
Installation
Partsand literature are packaged inside the dryer drum.
Excess Weight
Hazard
Usetwo or more people to move and install the dryer,
Failure to do so can result in back or other injury,
Only remove the packaging
at the customer's
premises. This will ensure the appliance arrives in
pristine condition
and reduces the risk of damage when transporting
to the customer's
home.
Make sure dryer is in a suitable location for installation.
Consider installing
the dryer before the washing machine in a side by side installation,
this will
allow better access to electrical
and exhaust connections.
Remove packaging
1. Remove staps
4.
4. Remove the carton
by lifting it off the
product (do not cut
the carton off).
2_
2. Unfold the bottom
flaps on the carton
5 Remove the basepacker
by tilting
the product
back and walking
the
product
off t.
3.
3. Unfold the top flaps on
the carton, remove top
packer.
6. Remove the drum
packer and the tape
from the lint collector
bucket n the drum.
Advertisement
Table of Contents
