Table of Contents
Advertisement
Using your
dryer
Lint bucket
The AeroSmart dryer's lint removal system is unique.
Unlike other dryers, the AeroSmart dryer automatically
removes the lint for you, from the lint screen - all you
have to do is tip the lint out!
The lint filter is hidden behind the lint bucket. As the air
passes through
this filter the lint is caught on the fine
mesh. Once the lint is about W' (2 ram) thick it comes into
contact
with a scraper which deposits
it into the bucket.
This process is automatically
performed
every time lint
builds up on the filter.
Apart from the benefit of not having to scrape the lint
after every cycle, it also means the drying efficiency
is not
affected
by lint build-up
during the drying cycle.
The lint bucket is located inside the dryer on the left-hand
side, You can remove it by gently pulling the handle and
lifting outwards.
It slots easily back into place.
This lint bucket does not need to be cleaned as regularly
as other dryer's lint filters. The lint bucket only needs to
be emptied
before the lint reaches the top of the
transparent
section.
Fig,43 Removing tint bucket
Empty before this
evel s reached
Fig.44 Mr_ximum lint level
ft is important
that you run your dryer with the tint bucket in place at aft times.
Advertisement
Table of Contents
