Nortel 1000 Con?guration guide Manual page 64

64 Configuring CS 1000
8
Verifying configuration
After configuring the Virtual IP D-channel, SIP Route, Converged Desktop
AML, and the other elements, log in to the Leader Signaling Server of the
node. At the Command Line Interface (CLI), use the commands cdsShow
and cdsAgentShow to verify the configuration. Output of the commands
will be similar to that shown
(page 65)
The two diagrams show that the AML link is Up and your PCA agents have
been acquired by the ACD queue you configured for CD2.
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
Copyright © 2005-2008, Nortel Networks
.
Click Save and Transfer.
and Figure 18 "Verifying configuration: cdsAgentShow" (page
Note: InFigure 17 "Verifying configuration: cdsShow" (page 65)
Figure 18 "Verifying configuration: cdsAgentShow" (page
the Converged Telephone Call Forward DN.
Nortel Communication Server 1000
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
—End—
inFigure 17 "Verifying configuration: cdsShow"
65).
and
65), CDN is