Nortel 1000 Con?guration guide Manual page 55

Prompt Response
TYPE: SPN
5100
SPN
xx
- FLEN
xxx
-RLI
In the case where the customer has used all Special Numbers (SPN), a
CDP Distant Steering Code (DSC) can be used as a Service DN.
Do this only if the Service DN has not already been configured as a Special
Number in LD 90 on
54).
LD 87 Configure Steering Code to be used as the Service DN for making Virtual Trunk call
from Agent.
Prompt Response
REQ: NEW
CUST xx
FEAT: CDP
TYPE DSC
x...x
DSC
-FLEN (0)-24
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
Copyright © 2005-2008, Nortel Networks
.
CS 1000 SIP configuration and UDP location dialing 55
Description
AC1 = NARS/BARS
AC2 = NARS
Special Number translation (Special code translation block)
Configure the CDS Service DN as an SPN, and point it
to the SIP trunk. This number is only internal between
the Call Server and the Signaling Server for reserving the
Virtual Trunk when routing the terminating CD call out to
the MCS 5100.
Special Number.
The same DN must be used in the config.ini file in the
Service DN field on the Signaling Server.
Flexible length number of digits
Flexible length is the exact number of digits the system
expects to receive before accessing a trunk and outpulsing
those digits.
Route List Index for Converged Desktop Service Class of
Service (CLS)
The RLI number must point to the SIP Virtual Trunk on the
desired Signaling Server. For example, if the CDN and
SPN are configured on Signaling Server 1, then this RLI
must use the route configured on Signaling Server 1.
ATTENTION
"LD 90 Configure Service DN for Converged Desktop." (page
Description
Add new data block.
Customer number as defined in LD 15.
(Customer number associated with this telephone.)
Coordinated Dialing Plan
Distant Steering Code
Service DN
Flexible length number of digits
Nortel Communication Server 1000
NN43001-321 01.05 Standard
Release 5.0 15 February 2008