Nortel 1000 Con?guration guide Manual page 54

54 Configuring CS 1000
Prompt Response
...
AC1 xxxx
or
AC2
Removal of the HLOC digits is necessary so that local termination is
possible. Configuring digit manipulation is necessary to properly handle a
UDP number sent by the MCS 5100 based on the Private Charge ID of the
MCS 5100 user profile. The MCS 5100 always qualifies this number as a
UDP number. Digit manipulation will already have been configured if UDP is
used. Even if only CDP is used, you must still configure digit manipulation.
LD 86 Configure Digit Manipulation.
Prompt Response
REQ NEW
xx
CUST
FEAT DGT
DMI 3
3
DEL
LD 86 Configure Home Location Code.
Prompt Response
REQ CHG
xx
CUST
FEAT NET
HLOC 334
3
-DMI
LD 90 Configure Service DN for Converged Desktop.
Prompt Response
REQ NEW
CUST xx
FEAT NET
TRAN AC1 or AC2
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
Copyright © 2005-2008, Nortel Networks
.
Description
1-4 digit Flexible Numbering Plan Access Code 1.
The access code cannot conflict with the numbering plan.
Description
Add new data.
Customer number as defined in LD 15.
Digit manipulation data block
Digit Manipulation Index numbers
Number of leading digits to be Deleted (HLOC)
Description
Change existing data.
Customer number
Feature
Home Location Code
Digit Manipulation Index
Description
Add new data.
Customer number as defined in LD 15.
(Customer number associated with this telephone.)
Network translation tables
Access code, where:
Nortel Communication Server 1000
NN43001-321 01.05 Standard
Release 5.0 15 February 2008