Repetitive Cutting - Craftsman Contractor 113.299112 Owner's Manual

Whencuttinglong workpieces, invertAUXILLIARY
FENCEZWQRK SUPPORT andposition itontopofthe
guidebarstosupport theworkp_eces asnear t otheend
aspossible, i f t!_isdoesnotadequately s upport t he
workpiece, youcanmakea simple s upport byclamping
a piece ofplywood t oasawhorse.
Usethe hold-downclampon the mitergaugefor
greater accuracy:
\
REPETITIVE CUTTING
REPETITIVE CUFFING is known as cutting a quantity
of pieces the same length without having to mark each
piece,
1 Use the Stop Rods (optional accessory) only for cut-
ting duplicate pieces 6 in. long and longer.
2. DO NOT FEED workpiece with RIGHT hand, merely
guide it. making sure that It does not binC or pinch
the sawblade.
When making repetitive cuts from a tong workpiece,
make sure it is adequately supported.
Use the hold-down clamp on the miter gauge for
greater accuracy,
LEFT HAND REMOVED
FOR PICTURE CLARITY
48