1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. ThinkPad X130e
  6. Hardware maintenance manual

Lenovo ThinkPad X130e Hardware Maintenance Manual

Hardware maintenance manual - x130e
Hide thumbs Also See for ThinkPad X130e:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, User Manual
Hardware Maintenance Manual
ThinkPad X130e

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkPad X130e

Summary of Contents for Lenovo ThinkPad X130e

  • Page 1 Hardware Maintenance Manual ThinkPad X130e...
  • Page 2 Appendix A “Notices” on page 99. Second Edition (December 2011) © Copyright Lenovo 2011. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

  • Page 3: Table Of Contents

    FRU ....49 Checkout guide ....Before servicing ThinkPad X130e models ..Diagnostics using PC-Doctor for DOS..
  • Page 4 2040 Integrated camera ... Windows 7 Home Basic (32-bit) DVDs . . . 2050 Wireless LAN antenna assembly, wireless Windows 7 Home Basic (64-bit) DVDs . . . WAN antenna assembly, and LCD rear cover Windows 7 Home Premium (32-bit) DVDs .

  • Page 5: About This Manual

    Before servicing a ThinkPad product, be sure to read all the information under Chapter 1 “Safety information” on page 1 and Chapter 2 “Important service information” on page 19. © Copyright Lenovo 2011...
  • Page 6 Hardware Maintenance Manual...

  • Page 7: Chapter 1. Safety Information

    • Reinstall all covers correctly before returning the machine to the customer. • Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. © Copyright Lenovo 2011...

  • Page 8: Electrical Safety

    Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges.

  • Page 9: Safety Inspection Guide

    – Use caution; do not become a victim yourself. – Switch off power. – Send another person to get medical aid. Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service technicians from injury.

  • Page 10: Grounding Requirements

    2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people. •...
  • Page 11 DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 12 DANGER Hardware Maintenance Manual...
  • Page 13 PERIGO PERIGO PERIGO Chapter 1 Safety information...
  • Page 14 PERIGO PERIGO PERIGO PERIGO PERIGO DANGER Hardware Maintenance Manual...
  • Page 15 DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 16 DANGER DANGER VORSICHT VORSICHT VORSICHT Hardware Maintenance Manual...
  • Page 17 VORSICHT VORSICHT VORSICHT VORSICHT VORSICHT Chapter 1 Safety information...
  • Page 18 Hardware Maintenance Manual...
  • Page 19 Chapter 1 Safety information...
  • Page 20 Hardware Maintenance Manual...
  • Page 21 Chapter 1 Safety information...
  • Page 22 Hardware Maintenance Manual...
  • Page 23 Chapter 1 Safety information...
  • Page 24 Hardware Maintenance Manual...

  • Page 25: Chapter 2. Important Service Information

    – “FRU identification for CTO, CMV, and GAV products” on page 21 Important: • Advise customers to contact the Lenovo Customer Support Center if they need any assistance in obtaining or installing any software fixes, drivers, and UEFI BIOS downloads. Telephone numbers for Lenovo Support are available at: http://www.lenovo.com/support/phone...

  • Page 26: Strategy For Replacing A Hard Disk Drive

    Dynamic Configure To Order (CTO) This provides the ability for a customer to configure a Lenovo solution from an eSite, and have this configuration sent to fulfillment, where it is built and shipped directly to the customer. The machine label, Product Entitlement Warehouse (PEW), eSupport, and the HMM will load these products as the 4-digit MT and 3-digit model, where model = “CTO”...

  • Page 27: Fru Identification For Cto, Cmv, And Gav Products

    = a “fixed part number”, not “CTO” (Example: 1829-F1U). • PEW can be accessed at the following Web site: http://www.lenovo.com/support/site.wss/document.do?lndocid=LOOK-WARNTY Select Warranty lookup. Input the MT and the Serial number and the list of key commodities will be returned in the PEW record under COMPONENT INFORMATION.
  • Page 28 Use the HMM as a backup to PEW and eSupport to view the complete list of FRUs at the MT model level. Hardware Maintenance Manual...

  • Page 29: Chapter 3. General Checkout

    “What to do first” on page 23 • “Checkout guide” on page 24 – “Diagnostics using PC-Doctor for DOS” on page 24 – “Lenovo ThinkVantage Toolbox” on page 26 – “FRU tests” on page 27 • “Power system checkout” on page 28 ®...

  • Page 30: Checkout Guide

    Note: When you initialize the computer configuration, some devices are disabled, such as the serial port. If you test one of these devices, you will need to enable it by using Configuration utility for DOS. The utility is available on the following Web site: http://www.lenovo.com/support Hardware Maintenance Manual...

  • Page 31: Testing The Computer

    Testing the computer In this product, you need an external optical drive to use the PC-Doctor diagnostic CD to test the hardware features. Note: The PC-Doctor for DOS CD-R/CD-RW disc supports only test of internal optical disc drives (CD-RW, CD-RW/DVD Combo, and DVD Multi drives) on ThinkPad computers. It does not support test of any optical disc drives connected through USB devices, PC cards, CardBus cards, or similar.

  • Page 32: Lenovo Thinkvantage Toolbox

    Benchmark System DOS Shell Tech Support Form Battery Rundown Erase Drive Contents View PCDR Host Log Lenovo ThinkVantage Toolbox ® ® Lenovo ThinkVantage Toolbox is a diagnostic program that works through the Windows operating system. It enables you to view symptoms of computer problems and solutions for them, and includes automatic notification when action is required, computing assistance, advanced diagnostics, and diagnostic history.

  • Page 33: Fru Tests

    Web site. To run this program, do as follows: Windows 7: Click Start ➙ Control Panel ➙ System and Security ➙ Lenovo - System Health and Diagnostics. Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Lenovo ThinkVantage Toolbox.

  • Page 34: Power System Checkout

    Table 1. FRU tests (continued) Applicable test TrackPoint or pointing If the TrackPoint does not work, check the configuration as specified in the ThinkPad device Setup. If the TrackPoint is disabled, select Automatic to enable it. After you use the TrackPoint, the pointer may drift on the screen for a short time. This drift can occur when a slight, steady pressure is applied to the TrackPoint pointer.

  • Page 35: Checking Operational Charging

    Note: Output voltage of pin no.2 of the ac power adapter may different from the one you are servicing. 3. If the voltage is not correct, replace the ac power adapter. 4. If the voltage is acceptable, do the following: •...

  • Page 36: Checking The Backup Battery

    4. If the voltage is more than +11.0 V dc, measure the resistance between battery terminals 5 and 7. The resistance must be 4 to 30 K Ω. If the resistance is not correct, replace the battery pack. If the resistance is correct, replace the system board.

  • Page 37: Chapter 4. Related Service Information

    Service Web site: When the latest maintenance diskette and the system program service diskette become available, they will be posted on http://www.lenovo.com/support. Restoring the factory contents by using Recovery Disc Set When the hard disk drive is replaced because of a failure, no product recovery program is on the new drive.

  • Page 38: Passwords

    2. Insert the Operating System Recovery Disc into the DVD drive. 3. Press F10 to save the ThinkPad Setup configuration changes. Follow the instructions on the screen to begin the recovery process. 4. Select your language and click Next. 5. Read the license. If you agree with the terms and conditions, select I accept these terms and conditions and then click Next.

  • Page 39: Supervisor Password

    If no master hard disk password is available, neither Lenovo nor Lenovo authorized service technicians provide any services to reset either the user hard disk password or the master hard disk password, or to recover data from the hard disk drive.

  • Page 40: Power Management

    1. Turn on the computer. 2. When the ThinkPad logo comes up, immediately press F1 to enter the ThinkPad Setup program. 3. Select Security. 4. Select Password. 5. Select Hard-disk x password, where x is the letter of the hard disk drive. A pop-up window opens. 6.

  • Page 41: Hibernation Mode

    • The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters sleep (standby) mode. Wait a few seconds before taking any action to reenter operation mode. Hibernation mode In hibernation mode, the following occurs: •...

  • Page 42: Numeric Error Codes

    Note: For a device not supported by diagnostic codes in the ThinkPad Notebooks, see the manual for that device. Numeric error codes Table 2. Numeric error codes Symptom or error FRU or action, in sequence 0177 System board. Bad SVP data, stop POST task-The checksum of the supervisor password in the EEPROM is not correct.

  • Page 43: Error Messages

    Thermal sensing error. System board. This system does not support batteries that are not Replace the battery. genuine Lenovo-made or authorized. This system will continue to boot, but may not charge unauthorized batteries. Attention: Lenovo has no responsibility for the...

  • Page 44: Lcd-Related Symptoms

    If the LCD you are servicing has two or less visible defective pixels, it should not be considered faulty. However, if the LCD has three or more visible defective pixels, it will be deemed as defective by Lenovo and it should be replaced.

  • Page 45: Undetermined Problems

    Undetermined problems If the diagnostic tests did not identify the adapter or device that has failed, if wrong devices are installed, or if the system simply is not operating, follow these procedures to isolate the failing FRU (do not isolate FRUs that have no defects).
  • Page 46 Hardware Maintenance Manual...

  • Page 47: Copyright Lenovo

    • Red: The computer is on (in normal mode). • Fast blinking red: The computer is entering sleep (standby) or hibernation mode. • Slow blinking red: The computer is in sleep (standby) mode. • Off: The computer is off or in hibernation mode. © Copyright Lenovo 2011...
  • Page 48 Hardware Maintenance Manual...

  • Page 49: Chapter 6. Fn Key Combinations

    Fn+F7 combination is available for switching a display output location. For Windows 7: Switch between the computer display and an external monitor. Windows will show these display options: • Computer display only (LCD) • Computer display and external monitor (same image) © Copyright Lenovo 2011...
  • Page 50 Table 8. Fn key combinations (continued) Key combination Description • Computer display and external monitor (extended desktop) • External monitor only Note: To switch between the computer display and an external monitor, the Win+P key combination is also available. For Windows XP: Switch between the computer display and an external monitor.

  • Page 51: Chapter 7. Fru Replacement Notices

    CRU; and (2) you may be charged for the replacement CRU if Lenovo does not receive the defective part within thirty (30) days of your receipt of the replacement CRU. See your Lenovo Limited Warranty documentation for full details.

  • Page 52: Retaining Serial Numbers

    If you replace the system board, you must restore the serial number of the system board to its original value. Before replacing the system board, save the original serial number by doing the following: 1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later, and restart the computer.

  • Page 53: Retaining The Uuid

    4. To read the box build date, select 5. Read box build date from EEPROM, and follow the instructions on the computer. After an engineering change is applied to the machine, the EEPROM must be updated. Use the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later to update the EEPROM.
  • Page 54 Hardware Maintenance Manual...

  • Page 55: Chapter 8. Removing And Replacing A Fru

    CRU; and (2) you may be charged for the replacement CRU if Lenovo does not receive the defective part within thirty (30) days of your receipt of the replacement CRU. See your Lenovo Limited Warranty documentation for full details.

  • Page 56: 1010 Battery Pack

    Important notice for replacing a battery pack: • Lenovo ThinkVantage Toolbox has an automatic battery diagnostic that determines if the battery pack is defective. A battery pack FRU should not be replaced unless this diagnostic shows that the battery is defective.

  • Page 57: 1020 Bottom Slot Cover

    When installing: Install the battery pack in the slot, and make sure that the battery latch is in the locked position. 1020 Bottom slot cover For access, remove this FRU: • “1010 Battery pack” on page 50 Removal steps of bottom slot cover Note: Loosen the screws , but do not remove them.

  • Page 58: 1030 Memory Modules

    1030 Memory modules For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 Removal steps of memory modules Note: If only one memory module is used on the computer you are servicing, the card must be installed in the upper SLOT , but not in the lower SLOT When installing: Insert the notched end of the memory module into the socket.

  • Page 59: 1040 Hard Disk Drive Or Solid State Drive Assembly

    1040 Hard disk drive or solid state drive assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.

  • Page 60: 1050 Pci Express Mini Card For Wireless Lan/Wimax

    When installing: Make sure the hard disk drive or solid state drive assembly is attached firmly. Removal steps of the hard disk drive or solid state drive bracket Step Screw (quantity) Color Torque M3 × 3.5 mm, wafer-head, nylok-coated (2) Black 0.392 Nm (4 kgfcm)
  • Page 61 Step Screw (quantity) Color Torque M2 × 3 mm, wafer-head, nylok-coated (1) Black 0.181 Nm (1.85 kgfcm) When installing: Plug the gray cable into the jack marked MAIN or M, and the black cable into the jack marked AUX or A on the card. Note: In models with a wireless LAN card that has three antenna connectors, plug the gray cable (MAIN) into the jack marked TR1, the white cable (third) into the jack marked RO or TR3, and the black cable (AUX) into the jack marked TR2 on the card.

  • Page 62: 1060 Pci Express Mini Card For Wireless Wan

    1060 PCI Express Mini Card for wireless WAN For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 Removal steps of PCI Express Mini Card for wireless WAN In step , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in the direction of the arrows.

  • Page 63: 1070 Keyboard

    When installing: Plug the orange cable into the jack marked MAIN, and the blue cable into the jack marked AUX on the card. 1070 Keyboard For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover”...
  • Page 64 Hardware Maintenance Manual...
  • Page 65 Installation steps of keyboard To install the keyboard, do the following: 1. Attach the connectors 2. Attach the keyboard so that the keyboard edge is under the frame. 3. To make sure that the front side of the keyboard is housed firmly, gently press the keys with your fingers and try to slide the keyboard toward you.

  • Page 66: 1080 Top Case Assembly

    4. Secure the keyboard by tightening the screws from the bottom side of the computer. 1080 Top case assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 •...
  • Page 67 When installing: Make sure that the connectors are attached firmly. Torque Step Screw (quantity) Color M2 × 6 mm, wafer-head, nylok-coated (3) Silver 0.181 Nm (1.85 kgfcm) In step , push the top case assembly out from the frame as shown in the following figure by using a plastic pry tool, and remove the top case assembly in the direction shown by the arrow When installing: Make sure that all the projections of the top case assembly are attached firmly to the guide holes of the base cover.

  • Page 68: 1090 Power Sub Card And Microphone

    1090 Power sub card and microphone For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 • “1070 Keyboard” on page 57 • “1080 Top case assembly” on page 60 Removal steps of power sub card Step Screw (quantity)

  • Page 69: 1100 Bluetooth Daughter Card

    Removal steps of microphone 1100 Bluetooth daughter card For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 • “1070 Keyboard” on page 57 • “1080 Top case assembly” on page 60 Removal steps of Bluetooth daughter card Step Screw (quantity)

  • Page 70: 1110 Speaker Assembly

    1110 Speaker assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 • “1070 Keyboard” on page 57 • “1080 Top case assembly” on page 60 Removal steps of speaker assembly Step Screw (quantity) Color...

  • Page 71: 1130 System Board Assembly, Fan Assembly, And Backup Battery

    • “1080 Top case assembly” on page 60 Removal steps of I/O board Torque Step Screw (quantity) Color M2 × 3 mm, wafer-head, nylok-coated (1) Black 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connector is attached firmly. 1130 System board assembly, fan assembly, and backup battery Important notices for handling the system board: When handling the system board, bear the following in mind.
  • Page 72 • If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated conductive surface. After replacing the system board, run PC-Doctor for DOS to make sure that the HDD Active Protection System still functions.
  • Page 73 When installing: Make sure that the connector is attached firmly. Removal steps of fan assembly and backup battery Loosen the screws in order as shown in the following figures, but do not remove them. DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.

  • Page 74: 1140 Crt Board Assembly (With Cable)

    1140 CRT board assembly (with cable) For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 • “1070 Keyboard” on page 57 • “1080 Top case assembly” on page 60 Removal steps of CRT board assembly Torque Step...
  • Page 75 Removal steps of DC-in sub card Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. The following illustrations show the location of each label. Chapter 8 Removing and replacing a FRU...
  • Page 76 Note: If the Windows Certificate of Authentication label (COA) is attached to a part that is replaced, return the old part with the label attached to the customer, or provide a letter to the customer stating what the label was originally on the system and what the label part number, serial number, and product key were. When you replace the base cover, apply the following labels: •...

  • Page 77: 2010 Lcd Unit

    For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels, apply both to the new base cover. 2010 LCD unit For access, remove these FRUs in order: • “1010 Battery pack” on page 50 •...
  • Page 78 Step Screw (quantity) Color Torque M2.5 × 6 mm, wafer-head, nylok-coated (4) Black 0.392 Nm (4 kgfcm) Hardware Maintenance Manual...

  • Page 79: 2020 Lcd Bezel Assembly

    2020 LCD bezel assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover” on page 51 • “1040 Hard disk drive or solid state drive assembly” on page 53 • “1050 PCI Express Mini Card for wireless LAN/WiMAX” on page 54 •...

  • Page 80: 2030 Lcd Panel, Lcd Cable, And Hinges

    When installing: Make sure that all the latches are attached firmly. Then secure the bezel with the screws. 2030 LCD panel, LCD cable, and hinges For access, remove these FRUs in order: • “1010 Battery pack” on page 50 • “1020 Bottom slot cover”...

  • Page 81: 2040 Integrated Camera

    When installing: Make sure that the connectors are attached firmly. Removal steps of hinges Step Screw (quantity) Color Torque 0.181 Nm M2 × 4 mm, wafer-head, nylok-coated (4) Silver (1.85 kgfcm) 2040 Integrated camera For access, remove these FRUs in order: •...

  • Page 82: 2050 Wireless Lan Antenna Assembly, Wireless Wan Antenna Assembly, And Lcd Rear Cover Assembly

    • “1050 PCI Express Mini Card for wireless LAN/WiMAX” on page 54 • “1060 PCI Express Mini Card for wireless WAN” on page 56 • “1070 Keyboard” on page 57 • “1080 Top case assembly” on page 60 • “1130 System board assembly, fan assembly, and backup battery” on page 65 •...
  • Page 83 Cable routing: When you install the antenna assembly, route the cables as shown in the following figure. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. Chapter 8 Removing and replacing a FRU...
  • Page 84 : Wireless LAN AUX antenna (black) and wireless WAN AUX antenna (blue) : Wireless WAN MAIN antenna (red) and wireless LAN MAIN antenna (gray) Note: Some models might have a third white cable for wireless LAN. Hardware Maintenance Manual...

  • Page 85: Chapter 9. Locations

    Chapter 9. Locations This chapter presents the locations of the ThinkPad X130e hardware components. Front view Integrated camera Media card reader slot Power switch Touch pad Security keyhole TrackPoint buttons ac power connector TrackPoint pointing stick UltraNav pointing device USB connector...

  • Page 86: Rear View

    Rear view HDMI port Sleep (standby) status indicator Combo audio jack Fan louvers Ethernet connector External monitor connector USB connector For the description of the power status indicator, see Chapter 5 “Status indicators” on page 41. Bottom view Battery pack Bottom slot cover Battery pack latch Hardware Maintenance Manual...

  • Page 87: Chapter 10. Parts List

    CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You may find a list of CRUs in the publications that ship with your product or at http://www.lenovo.com/CRUs. You may be required to return the defective part that is replaced by the CRU.

  • Page 88: Overall

    Overall Hardware Maintenance Manual...
  • Page 89 Table 9. Parts list-Overall No. FRU (Overall) FRU no. LCD unit (see “LCD FRUs” on page 87) Keyboard bezel assembly without fingerprint reader 04W3520 N • 2338-CTO, 2Ex, 2Dx, 2Cx, 2Bx, 2Ax, 29x, 28x, 27x, 26x, 25x, 24x, 23x, Q2x, R2x, 52x, 42x •...
  • Page 90 Table 9. Parts list-Overall (continued) No. FRU (Overall) FRU no. 42T4957 Battery pack, 6 cell Li-ion (2.8 Ah) • 2338-CTO, 2Ex, 2Dx, 2Cx, 2Bx, 2Ax, 29x, 28x, 27x, 26x, 25x, 24x, 23x, Q2x, R2x, 52x, 42x 42T4959 • 2339-CTO, 2Lx, 2Kx, 2Jx, 2Hx, 2Gx, 2Fx, 2Ex, 2Dx, 2Cx, 2Bx, 2Ax, 29x, 28x, 27x, 26x, 42T4961 25x, 24x, 23x •...
  • Page 91 Table 9. Parts list-Overall (continued) No. FRU (Overall) FRU no. 04W1798 SATA solid state drive, 128 GB • 2338-CTO 75Y5261 • 2339-CTO, 2Kx 04W1799 • 2340-CTO • 0622-CTO • 0627-CTO • 0629-CTO Bottom slot cover with screw 04W3521 * • 2338-CTO, 2Ex, 2Bx, 2Ax, 29x, 28x, 27x, 26x, 25x, 24x, 23x, Q2x, R2x, 52x, 42x •...
  • Page 92 Table 9. Parts list-Overall (continued) No. FRU (Overall) FRU no. Ericsson F5521gw Wireless WAN card 60Y3279 • 2338-CTO, 2Ex • 2339-CTO, 2Lx • 2340-CTO • 0622-CTO • 0627-CTO, 2Ex, 2Dx, 2Kx • 0629-CTO Ericsson F5521gw Wireless WAN card for Malaysia 60Y3267 •...

  • Page 93: Lcd Frus

    LCD FRUs In ThinkPad X130e models, the type of the LCD is 11.6-inch HD LED-backlight LCD (Table 10 “Parts list-LCD” on page 88). Chapter 10 Parts list...

  • Page 94: Keyboard

    Table 10. Parts list-LCD No. FRU (LCD) FRU no. 04W3530 N LCD front bezel LCD module, 11.6-inch HD anti-glare 04W1594 04W1596 Wireless LAN/WAN antenna 04W3557 N Hinges 04W3528 04W3529 LCD cable 04W3615 N Integrated camera 04W1897 04W1898 04W1899 LCD cover kit, black 04W3524 N •...
  • Page 95 Table 11. Parts list-Keyboard (continued) Language FRU no. 63Y0049 63Y0121 Canadian French (058) Canadian French (Acnor) 63Y0048 63Y0120 63Y0055 63Y0127 Czech Danish 63Y0056 63Y0128 Dutch 63Y0066 63Y0138 Finnish, Swedish 63Y0073 63Y0145 French 63Y0058 63Y0130 German 63Y0059 63Y0131 63Y0060 63Y0132 Greek (U.S. English and Greek layout) Hebrew 63Y0061 63Y0133...

  • Page 96: Miscellaneous Parts

    Miscellaneous parts Table 12. Parts list-Miscellaneous parts FRU no. Screw kit (including nylok-coated screws): 04W3523 N • M2 × 3 mm (black), wafer head (17) • M2 × 4 mm (silver), wafer head (6) • M2.5 × 6 mm (black), wafer head (6) •...

  • Page 97: Recovery Discs

    Table 16. Parts list–3-pin power cords FRU no. Country or region Australia, New Zealand 42T5050 • Models: CTO, xxM 42T5135 42T5056 South Africa • Models: CTO, xxG 42T5141 42T5004 Canada, U.S. • Models: CTO,xxT 42T5089 42T5065 China (P.R.C.) (other than Hong Kong S.A.R.) •...

  • Page 98: Windows 7 Home Basic (64-Bit) Dvds

    Table 17. Parts list-Windows 7 Home Basic (32-bit) recovery DVDs Language CRU ID Arabic 04T1878 Brazilian Portuguese 04T1879 French 04T1882 Indian English 04T1881 Portuguese 04T1883 Russian 04T1884 Serbian-Latin 04T1886 04T1880 Simplified Chinese Spanish 04T1885 Turkish 04T1887 04T1888 US English Windows 7 Home Basic (64-bit) DVDs Windows 7 Home Basic (64-bit) is preinstalled as the operating system in the following models: •...

  • Page 99: Windows 7 Home Premium (64-Bit) Dvds

    • 0622-CTO • 0627-CTO • 0629-CTO Table 19. Parts list-Windows 7 Home Premium (32-bit) recovery DVDs Language CRU ID Indian English 04T1890 Simplified Chinese 04T1889 US English 04T1891 Windows 7 Home Premium (64-bit) DVDs Windows 7 Home Premium (64-bit) is preinstalled as the operating system in the following models: •...

  • Page 100: Windows 7 Professional (32-Bit) Dvds

    Table 20. Parts list-Windows 7 Home Premium (64-bit) recovery DVDs (continued) Language CRU ID Traditional Chinese 04T1895 Turkish 04T1912 US English 04T1914 US English disable 04T1913 Windows 7 Professional (32-bit) DVDs Windows 7 Professional (32-bit) is preinstalled as the operating system in the following models: •...

  • Page 101: Windows 7 Professional (64-Bit, Education) Dvds

    Table 22. Parts list-Windows 7 Professional (64-bit) recovery DVDs (continued) Language CRU ID French 04T1855 German 04T1857 Greek 04T1856 Hebrew 04T1858 Hungarian 04T1859 Indian English 04T1854 Japanese 04T1860 Korean 04T1861 Polish 04T1862 Portuguese 04T1863 Romanian 04T1864 Russian 04T1865 04T1868 Serbian-Latin Simplified Chinese 04T1851 04T1866...

  • Page 102: Windows 7 Ultimate (64-Bit) Dvds

    • 0629-CTO Table 24. Parts list-Windows 7 Ultimate (32-bit) recovery DVDs Language US English 04T1876 Windows 7 Ultimate (64-bit) DVDs Windows 7 Ultimate (64-bit) is preinstalled as the operating system in the following models: • 2338-CTO • 2339-CTO • 2340-CTO •...

  • Page 103: Common Service Tools

    USB floppy diskette drive for maintenance diskette 05K9283 USB floppy diskette drive tool kit 27L3452 Test card for integrated Smart Card 42W7820 LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later Note: Download the file from the following Web site: http://www.lenovo.com/support Chapter 10 Parts list...
  • Page 104 Hardware Maintenance Manual...

  • Page 105: Appendix A. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 106: Electronic Emission Notices

    Electronic emission notices For electronic emission information on Class B digital devices, refer to the corresponding information in the User Guide. Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both: Active Protection System Lenovo ThinkPad...
  • Page 108 Part Number: 0A96359_01 Printed in China (1P) P/N: 0A96359_01 *0A96359_01*...

Table of Contents