Lenovo ThinkPad X130e Hardware Maintenance Manual page 67

When installing: Make sure that the connectors are attached firmly.
Step Screw (quantity)
3
M2 × 6 mm, wafer-head, nylok-coated (3)
In step 9 , push the top case assembly out from the frame as shown in the following figure by using a plastic
pry tool, and remove the top case assembly in the direction shown by the arrow
When installing: Make sure that all the projections of the top case assembly are attached firmly to the
guide holes of the base cover.
Torque
Color
Silver 0.181 Nm
(1.85 kgfcm)
10 .
.
Chapter 8 Removing and replacing a FRU
61