When installing: Make sure the hard disk drive or solid state drive assembly is attached firmly.
Removal steps of the hard disk drive or solid state drive bracket
Step
Screw (quantity)
1
M3 × 3.5 mm, wafer-head, nylok-coated (2)
1050 PCI Express Mini Card for wireless LAN/WiMAX
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 50
•
"1020 Bottom slot cover" on page 51
Removal steps of PCI Express Mini Card for wireless LAN/WiMAX
1
In step
, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the
connectors with your fingers and gently unplug them in the direction of the arrows.
Note: Some models might have a third white antenna cable.
54
Hardware Maintenance Manual
Color
Torque
Black
0.392 Nm
(4 kgfcm)