Figure 1 Configuration using local connection
.
Remote configuration using Telnet
Figure 2
shows the Telnet configuration for the P9000 Virtualization Adapter on a Windows machine.
The Virtual Center server (VIC), SRM, and P9000 Virtualization Adapter are configured on Windows
2003. RAID Manager is on a remote host (for example, Linux, Solaris, or HP-UX).
The P9000 Virtualization Adapter is configured using the command.pl Perl script file (see
command.pl
example
on page 12) as an interface adapter and the rmsra command. In a remote connection,
command.pl calls the rmsra command on a remote RAID Manager.
IMPORTANT:
If the RAID Manager instance is on Windows, the P9000 Virtualization Adapter must use the local
configuration because the P9000 Virtualization Adapter is called directly, and does not use the
LAN/telnet server locally.
10
Overview of the P9000 Virtualization Adapter