Connecting to RAID Manager on the Windows host:
HORCMINST=X
This connects to HORCMINST=X on Windows host.
$HORCMINST
This connects to %HORCMINST% setting on this Windows host. Enter the username and
password as dummy.
After you enter the username and password, click Connect and then click OK to discover P-
VOL LUNs on the protected array.
Verify that the array managers are discovered the following information.
Local Array ID and Remote Array ID information
LUN count (equals the number of P-VOLs LUNs)
34
Configuring SRM and the disk array