Rmsra Command And Environmental Variables; Rmsra Command - HP XP20000/XP24000 Administrator's Manual

2 rmsra command and environmental
variables

rmsra command

Configures the P9000 Virtualization Adapter parameters
Description
Use the rmsra command to modify the P9000 Virtualization Adapter parameters.
Syntax
rmsra {–h | –XMLSTDOUT | –XMLSTDERR [sralog=path_name] | –auto | —loglvl=
[quiet] [error] [warning] [info] [verbose] [trivia] | —timeout=value |
—testMU=value}
Arguments
–h
Displays command usage.
–XMLSTDOUT
This option is used to change the output destination of XML from the output destination specified
by SRM to STDOUT.
–XMLSTDERR [sralog=path_name]
This option is used to change the output destination of XML from the output destination
(<OutputFile>) specified by SRM to STDERR. The sralog is used to change the output destination
of the error messages from STDERR.
–auto
This option is used to start HORCM instance automatically. If the instance is not running, the
P9000 Virtualization Adapter starts HORCM X and HORCM X+1 (but ignores the results of
HORCM X+1). In addition to starting, this option executes the horcmshutdown command
for the HORCM instance.
—loglvl= [quiet] [error] [warning] [info] [verbose] [trivia]
This option is used to modify the logging level defined by SRM. The value can be:
quiet
error
warning
info
P9000 Virtualization Adapter Administrator Guide 21