Configuring SRM to communicate with the P9000 Virtualization
Adapter
To configure SRM to communicate with the P9000 Virtualization Adapter:
1.
Configure Array Manager.
When the protected and recovery SRM servers have been paired, click Configure to configure
Array Manager to use the P9000 Virtualization Adapter.
2.
Add the P9000 Virtualization Adapter to SRM on the protected site.
From the Configure Array Managers window, click Add to add connection information for the
P9000 Virtualization Adapter.
If the SRM and the P9000 Virtualization Adapter are using a remote connection:
Select the P9000 Virtualization Adapter from the Manager Type that is connected to the
P9000 Virtualization Adapter.
Enter the Alias to connect to RAID Manager instance via the P9000 Virtualization.
32
Configuring SRM and the disk array