HP Surestore 125ex - Optical Jukebox Manual page 71

3
3
O
PERATING THE
NOTE:
NOTE:
Caution:
NEXT
8. Switch the jukebox standby/on switch to STANDBY, then back to ON to save the new SCSI ID in jukebox memory.
PREVIOUS
JUMP
CONTENTS
INDEX
J
UKEBOX
CONFLICT displays if you attempt to set the jukebox controller and a drive to the same ID. Repeat the procedure and
reset one of the IDs to another, non-conflicting ID.
After you change an ID you may have to restart your host computer for the new ID to be recognized.
Do not turn power to STANDBY in this jukebox until you are sure the SCSI bus is inactive. Removing power from a SCSI
peripheral when the bus is active can result in data loss and/or indeterminate bus states. Check your host system manuals for
information about checking the SCSI bus status.
32