Brocade Communications Systems StoreFabric SN6500B Documentation Update page 25

2. On the host side, enable trunking as described in the Brocade Adapters Administrator's Guide.
3. On the switch side, enable the ports using the portEnable command.
Fabric OS Documentation Updates
53-1002063-09
c. Enable the trunk on the ports using the portTrunkArea command.
switch:admin> porttrunkarea --enable 3/40-41 -index 296
Trunk index 296 enabled for ports 3/40 and 3/41.
switch:admin> portenable 3/40
switch:admin> portenable 3/41
Documentation Updates for Fabric OS v6.4.1 and later
4
13