Brocade Communications Systems StoreFabric SN6500B Documentation Update page 37

Brocade fabric os documentation updates - supporting fabric os v6.4.x (53-1002063-09, august 2012)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

The fwShow command was deprecated in Fabric OS v6.4.0 along with fwConfigure. Typically, when
Brocade announces deprecation of a command for a given Fabric OS release, the commands are still
functional and only an announcement is made in the preface. The man pages are kept intact until the
commands are removed in the following release.
For the fwShow command, the man page was accidentally removed from the printed manual. It is
reprinted below.
fwShow
Displays the class thresholds monitored by Fabric Watch.
Synopsis
fwshow [--port --persistence] | [--disable --port]
Description
Use this command to display the thresholds monitored by Fabric Watch. This command also
displays the port persistence time and ports with all disabled thresholds.
For a description of the class thresholds supported in Fabric OS and the restrictions that apply to
some of the classes in terms of support for V/VE/VEX ports and GbE ports, refer to the help page
for fwConfigure or consult the Fabric Watch Administrator's Guide.
In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper)
class threshold is supported only on Embedded platforms.
TABLE 1
Class
Environmental
SFP
Port
Fabric
F/FL_Port (Optical)
F/FL_Port (Copper)
Resource
Notes
This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
The operands are as follows:
--port --persistence
--disable --port
Examples
To display thresholds for a fan in the SFP class:
Fabric OS Documentation Updates
53-1002063-09
Access Gateway mode classes
Displays the time (in seconds) that a port must be persistently in a state
before being marked as such.
Displays the ports that have all associated thresholds disabled.
switch:user> fwshow
1
: Show class thresholds
2
: Detail threshold information
5
fwShow
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v6.4

Table of Contents