Brocade Communications Systems StoreFabric SN6500B Documentation Update page 35

perfShowFilterMonitor
Displays all filter-based performance monitors.
Synopsis perfcshowfiltermonitor [slotnumber/]portnumber [interval]
Description Use this command to display counters for all filter-based performance monitors on the specified
port.
Notes This command requires a Brocade Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and
GbE ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slotnumber
portnumber
interval
Examples To display filter monitor traffic on a port at an interval of every 6 seconds:
Fabric OS Documentation Updates
53-1002063-09
For bladed systems only, this operand specifies the slot number of the port
on which the monitor is to be cleared, followed by a slash (/).
Specifies the number of the port on which the monitor is to be displayed,
relative to its slot for bladed systems. Use switchShow for a list of valid ports.
Specify an interval, in seconds (5 or more). This operand is optional; if
omitted, this command displays cumulative counts.
switch:admin> perfshowfiltermonitor 2/5 6
0 1 2
#Frames #CMDs #CMDs
---------------------------------------------------------------
0 0 0
26k 187 681
26k 177 711
26k 184 734
26k 182 649
26k 188 754
26k 183 716
26k 167 657
26k 179 749
26k 164 752
26k 190 700
3 4 5
#Frames #Frames #CMDs #CMD
0 0 0
682 682 494
710 710 534
734 734 550
649 649 467
755 755 567
716 717 534
656 655 488
749 749 570
752 752 588
700 700 510
perfShowFilterMonitor
6
0
187
176
184
182
184
183
167
179
164
190
5
23