Documentation Updates For Fabric Os V6.4.1; Chapter 3, Standard Cee Integrations And Configurations; Chapter 7, Configuring Lldp Using The Cee Cli - Brocade Communications Systems StoreFabric SN6500B Documentation Update

Brocade fabric os documentation updates - supporting fabric os v6.4.x (53-1002063-09, august 2012)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

Documentation updates for Fabric OS v6.4.1

Under the heading of "Defining a priority group table" on page 107, delete the example under step

Under the heading of "Defining a priority-table map" on page 108, add the following note:

Under the heading of "Defining a priority-table map" on page 108, delete the example under step 3.

Under the heading of "Applying a CEE provisioning map to an interface" on page 110, delete the

example under step 3.

Documentation updates for Fabric OS v6.4.1

Under the heading of "Creating the CEE map" on page 25, before the beginning of the procedure,

add the following note:

Under the heading of "Minimum CEE configuration to allow FCoE traffic flow" on page 29, add the

following note:

Under the heading of "Configuring the iSCSI profile" on page 83, add the following note:

NOTE

The name used in the cee-map command must begin with a letter, and can consist of letters,

digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not