Checking Error Messages And Lights - Epson STYLUS PRO 7700 User Manual

176 | Solving Problems
Message
BORDERLESS ERROR
LOAD A SUPPORTED PAPER
SIZE OR LOAD PAPER
CORRECTLY
CALL FOR SERVICE
CANNOT OPEN INK COVER

Checking Error Messages and Lights

The control panel includes various lights and an LCD display to indicate the
status of the printer:
Paper
light
power
light and
button
Pause/reset
light and button
When your paper runs out, ink is low, or a problem occurs, a message
appears on the LCD display, and the lights on the control panel come on or
flash. The following table lists the messages in alphabetical order and
includes an explanation and instructions for correcting the problem.
Explanation
The borderless setting is
selected and paper that doesn't
support borderless printing is
loaded.
The sheet size is not
recognized.
Paper is not loaded correctly.
An error has occurred.
The number 3000 indicates that
the power cord is not
connected correctly.
Something is obstructing the
indicated ink cover.
176
Print head
Ink
cleaning button
light
Ink open button
LCD
display
Response
Press
the setting in the printer driver or load
different paper.
Make sure the paper is flat.
Make sure paper is loaded correctly.
Note the error number, then turn the printer
off. Then check the power cord connection
at both ends and turn it back on. If the
message remains after restarting the printer
several times, contact your service provider
as described on page 13.
Remove the obstruction and press the
button again.
Paper feed up button
Paper release (ePlaten)
light and button
OK button
Menu button
Paper cut
button
Paper feed down button
Left arrow or paper
source button
to cancel the print job. Change