Epson STYLUS PRO 7700 User Manual page 179

Message
MAINTENANCE TANK
ERROR
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
MAINTENANCE TANK FULL
REPLACE THE
MAINTENANCE TANK
MAINTENANCE TANK
REPLACE THE LEFT SIDE
MAINTENANCE TANK
MAINTENANCE TANK
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
NO CARTRIDGE
INSTALL INK CARTRIDGE
NO MAINTENANCE TANK
INSTALL THE LEFT SIDE
MAINTENANCE TANK
NO MAINTENANCE TANK
INSTALL THE RIGHT SIDE
MAINTENANCE TANK
NOT ENOUGH EMPTY
SPACE
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
NOZZLE CHECK ERROR
PRESS THE BUTTON
NOZZLE CLOG DETECTED
NOT ENOUGH INK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
Explanation
The maintenance tank may be
incorrectly installed.
The maintenance tank is full.
The maintenance tank is at the
end of its service life.
The maintenance tank is at the
end of its service life.
Ink cartridge(s) not installed, or
an incorrect cartridge is
installed.
Maintenance tank is not
installed.
Maintenance tank is not
installed.
The maintenance tank is too
full for head cleaning.
Auto cleaning cannot be
performed.
There is not enough ink to
perform cleaning.
179
Solving Problems
Response
Reinstall the maintenance tank. If the error
remains, replace the maintenance tank. For
the Pro 9700, note which tank needs
replacement; see page 166.
Replace the maintenance tank. For the
Pro 9700, note which tank is full; see
page 166.
Replace the maintenance tank with a new
one.
Replace the maintenance tank with a new
one.
Install ink cartridge(s); see page 157. Do not
reinstall the incorrect cartridge.
Make sure the maintenance tank is fully
inserted. For the Pro 9700, note which tank
is missing; see page 166.
Make sure the maintenance tank is fully
inserted. For the Pro 9700, note which tank
is missing; see page 166.
Replace the maintenance tank; see
page 166.
Press the button to clear the error, then try
cleaning again. If necessary, cancel cleaning
from the computer, then restart the printer.
Select YES, then follow the instructions to
replace the ink cartridge.
| 179