134
|
Printing With Epson Drivers for Macintosh
Normal
cut
Double
cut
Single
cut
Note: These settings
override settings made
through the control panel.
•
Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
•
Paper Thickness
sharper image when printing on unusually thick or thin paper.
•
Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
lets you fine-tune the setting for various paper
•
Platen Gap
thicknesses.
•
Roll Paper Back Tension
on roll paper. Change the value if you find wrinkles on your
printouts when
Choosing Roll Paper Options
If you are printing on roll paper, make sure you choose one of the roll paper
options as the
Paper Size
you need to check these settings for various cutting and feeding options.
1. Select
Roll Paper Option
screen:
2. Choose one of the following
•
Normal Cut
image.
134
helps reduce banding. Choose a lower
helps reduce vertical banding and creates a
lets you decrease the paper suction level when
lets you adjust the tension when printing
is selected.
Auto
setting, as described on page 126. In addition,
from the drop-down menu. You see this
Auto Cut
allows margin space at the top and bottom of each
settings: