Printing With Epson Drivers for Windows
•
Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
•
Drying Time per Page
avoid smearing the ink.
•
Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
•
Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
•
Paper Thickness
sharper image when printing on unusually thick or thin paper.
lets you fine-tune the setting for various paper
•
Platen Gap
thicknesses.
•
Roll Paper Back Tension
on roll paper. Change the value if you find wrinkles on your
printouts when
3. When you finish selecting Paper Configuration settings, click
101
lets you print with non-Epson
lets you print with non-Epson media and
helps reduce banding. Choose a lower
lets you decrease the paper suction level when
helps reduce vertical banding and creates a
lets you adjust the tension when printing
is selected.
Auto
|
101
.
OK