Checking Error Messages And Lights - Epson Stylus Pro 4000 Printer Manual

116 | Solving Problems
Message Light
CHANGE PAPER
TYPE on
COMMAND —
ERROR
FEED SHEET —
PAPER
FEED SHEET
PAPER
MANUALLY
FORBIDDEN —
MEDIA FROM P.
TRAY

Checking Error Messages and Lights

The control panel includes various lights and an LCD display to indicate the
status of the printer:
LCD display
When your ink or paper runs out or a problem occurs, a message appears on
the LCD display, and the lights on the control panel come on or flash. The
following table lists the messages in alphabetical order and includes an
explanation and instructions for correcting the problem.
Explanation
Paper light Paper loaded does not
match the source
selected.
You're using the wrong
printer driver.
Damaged data was
sent to the printer.
Cut sheet needs to be
loaded manually.
Cut sheet needs to be
loaded manually.
Ink
Power
light
button
Pause button
and light
Response
Press the
correct setting: either
or or
Press the
seconds to cancel the print job. Make sure you
installed the correct driver for your printer.
Press the
seconds to cancel the print job.
Load the sheet in the manual feed slot. See
page 27 for instructions.
Load the sheet in the manual feed slot. See
page 27 for instructions.
5-116
Paper light
Menu
button
Left arrow or paper
source button
Paper Source button to select the
(for paper in the tray,
for roll paper)
.
Pause button and hold it for 3
Pause button and hold it for 3