Traps - Dell PowerEdge UPS 500T User Manual

Table 14. Product Physical Group Variables (continued)
Variable Name and Description
physicalLoadSegment2ShutdownAfterDelay
Number of seconds remaining until Load Segment 2 switches off. -1 if no shutdown
countdown is in effect.
UPS.OutletSystem.Outlet[3].DelayBeforeShutdown
physicalLoadSegment2StartupAfterDelay
Number of seconds remaining until Load Segment 2 switches on. -1 if no startup
countdown is in effect.
UPS.OutletSystem.Outlet[3].DelayBeforeStartup

Traps

Traps are sent on status transition (when an alarm appears or disappears). Traps are composed of three
levels and can be filtered:
S Informational
S Warning
S Critical
Trap OID is: 1.3.6.1.4.1.674.10902.2.140 (see Table 15).
Table 15. Product Physical Group Variables
Trap Name, Description, and Relative XML Object Path
trapInverterOverVoltage
Inverter AC over voltage (applies only to double-conversion models)
UPS.PowerConverter.Inverter.PresentStatus.VoltageTooHigh = 1
trapInverterOverVoltageOk
Inverter AC over voltage ok
UPS.PowerConverter.Inverter.PresentStatus.VoltageTooHigh = 0
trapInverterUnderVoltage
Inverter AC under voltage (applies only to double-conversion models)
UPS.PowerConverter.Inverter.PresentStatus.VoltageTooLow = 1
trapInverterUnderVoltageOk
Inverter AC under voltage ok
UPS.PowerConverter.Inverter.PresentStatus.VoltageTooLow = 0
Variable Variable
OID
Type Unit
6.3 Integer Seconds
6.4 Integer Seconds
Trap Trap Level
1
2
3
4
|
MIB Objects
2
1
2
1
69