Notified Applications - Dell PowerEdge UPS 500T User Manual

Dell network management card user's guide

Hide thumbs Also See for PowerEdge UPS 500T:

Table of Contents

S Factory Reset button: Restores the default configuration of all the card's parameters.

S Keep TCP/IP parameters: Select this option to maintain the IP address, subnet mask, gateway,

and BOOTP/DHCP value. To ensure security, this operation requires admin user name and

password. By default, user name and password are both admin.

Notified Applications

Use the Notified Applications page to modify a network management system (NMS) that is set to

receive notifications from the card or to add up to three NMSs to the notified applications.

To modify or add a new NMS:

Select Notified Applications from the menu bar. The Notified Applications page opens

(see Figure 33).

Figure 33. Notified Applications Page

Configuring the Card

Table of Contents