Option 3: Set Login Password To Default - Dell PowerEdge UPS 500T User Manual

S Set Ethernet speed: To change the network speed (see Figure 43). Restart the card to activate the
new parameters.
Figure 43. Ethernet Speed Settings

Option 3: Set Login Password to Default

Select menu item 3 to return the password to the default (admin). Wait for the confirmation message
(see Figure 44). The card is now accessible using the Web with the default password admin, but you
must restart the card to save the new password.
Figure 44. Default Password Confirmation Message
Set the Ethernet speed : [1 : Automatic, 2 : 10 MBit]
1
New Ethernet speed : Automatic
Wait while the new setting is saved.
Reset the card to enable the new configuration.
Login Password has successfully been set
Operation and Maintenance
|
83