Testing The Configuration - Dell PowerEdge UPS 500T User Manual

Dell network management card user's guide

Hide thumbs Also See for PowerEdge UPS 500T:

Table of Contents

Testing the Configuration

To verify that the Dell Network Management Card is operational:

Open a Web browser from a station connected to the same subnet as the card.

Enter the card's https://IP address (IPv4 or IPv6) in the address bar. The home page displays (see

Figure 12).

Figure 12. Home Page

If you logged in as admin, continue to Chapter 3, "Configuring the Card," on page 19 for additional

configuration options.

Getting Started

Table of Contents