E-Mail Message Settings - Dell PowerEdge UPS 500T User Manual

Dell network management card user's guide

Hide thumbs Also See for PowerEdge UPS 500T:

Table of Contents

E-Mail Message Settings

Use the Email Message Settings page to customize the content of e-mail messages initiated by the card

(see "Email Notification" on page 45). See Figure 29.

Figure 29. Email Message Settings Page

Common settings for all e-mail message recipients follow:

S Sender (59 characters maximum): Identifies the source of the message. The default value is

ups@domain.com.

This field allows free text. However, depending on the SMTP server configuration, the server may

check that the domain name contained in the Sender address exists and that the user in the Sender

address belongs to this domain.

S Subject: Identifies the subject of the e-mail message to be sent. Enter text and select from the

following optional check boxes to build the message subject:

UPS Name specifies the name of the UPS.

UPS Location displays the geographic location of the UPS (see "System Settings" on page 52).

Event Message identifies the event generating the e-mail message.

Configuring the Card

Table of Contents