Table of Contents
Advertisement
Speaker assembly
Description
Speaker assembly (includes cable)
Before removing the speaker assembly, remove the following components:
1.
Battery (see
2.
Service door (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the speaker assembly:
1.
Disconnect the speaker cable (1) from the system board and lift the speaker cable carefully from
the notches (2).
2.
Lift up and remove the speakers (3).
Reverse this procedure to install the speaker assembly.
Battery on page
30)
Service door on page
Hard drive on page
Optical drive on page
Keyboard on page
39)
Top cover on page
41)
31)
32)
34)
Component replacement procedures
Spare part number
639573-001
45
Advertisement
Table of Contents
