Table of Contents
Advertisement
TouchPad button board
Description
TouchPad button board (includes bracket and cable)
Before removing the TouchPad button board, remove the following components:
1.
Battery (see
2.
Service door (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the TouchPad button board:
1.
Release the ZIF connector (1) to which the TouchPad button board cable is attached, and then
disconnect the cable (2) from the TouchPad.
2.
Remove the screw (3).
3.
Remove the TouchPad button board (4).
Reverse the above procedure to reassemble and install the TouchPad button board.
46
Chapter 4 Removal and replacement procedures
Battery on page
30)
Service door on page
Hard drive on page
Optical drive on page
Keyboard on page
39)
Top cover on page
41)
31)
32)
34)
Spare part number
640885-001
Advertisement
Table of Contents
