Table of Contents
Advertisement
4
Removal and replacement
procedures
Preliminary replacement requirements
Tools required
The following tools are needed to complete the removal and replacement procedures:
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●
Service considerations
Before disassembly or assembly procedures, review and adhere to all service considerations.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Preliminary replacement requirements
23
Advertisement
Table of Contents
