Power button board
Description
Power button board
Before removing the power button board, remove the following components:
1.
Battery (see
2.
Service door (see
3.
Hard drive (see
4.
Optical drive (see
5.
WLAN module (see
6.
Memory module (see
7.
Keyboard (see
8.
Top cover (see
Remove the power button board:
1.
Turn the top cover upside down with the rear edge toward you.
2.
Remove the Phillips 3.0 x 2.0 screw (1) that secures the power button board to the top cover.
3.
Lift up and remove the power button board (2).
Reverse this procedure to install the power button board.
44
Chapter 4 Removal and replacement procedures
Battery on page
30)
Service door on page
Hard drive on page
Optical drive on page
WLAN module on page
Memory module on page
Keyboard on page
39)
Top cover on page
41)
31)
32)
34)
36).
37)
Spare part number
640884-001