Table of Contents
Advertisement
USB board
Description
USB board
Before removing the USB board, remove the following components:
1.
Battery (see
2.
Service door (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the USB board:
1.
Position the computer right-side up, with the right side toward you.
2.
Release the clips (1) that secure the USB board to the base enclosure.
3.
Lift the USB board (2) straight up to remove it from the computer.
Reverse this procedure to install the USB board.
Battery on page
30)
Service door on page
Hard drive on page
Optical drive on page
Keyboard on page
39)
Top cover on page
41)
31)
32)
34)
Component replacement procedures
Spare part number
640883-001
47
Advertisement
Table of Contents
