Optical drive
NOTE:
The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Description
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive
Before removing the optical drive:
1.
Battery (see
2.
Service door (see
Remove the optical drive:
1.
Remove the Phillips 6.0 x 2.5 screw (1) that secures the optical drive to the computer.
2.
Insert a straightened paper clip (2), into the release access opening in the bezel, and then press
inward.
3.
Grasp the bezel and slide the optical drive out of the computer (3).
4.
To replace the optical drive bracket, position the optical drive with the optical drive bracket
toward you.
5.
Remove the two Phillips 3.0 x 2.0 screws (1) that secure the optical drive bracket to the optical
drive.
34
Chapter 4 Removal and replacement procedures
Battery on page
30)
Service door on page
31)
Spare part
number
660833-001