JVC TH-V70 Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Home Theater System
  5. TH-V70
  6. Instructions manual
JVC TH-V70 Instructions Manual

JVC TH-V70 Instructions Manual

Dvd digital. cinema system
Hide thumbs Also See for TH-V70:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction Manual
JVC
DVD DIGITAl. CINEMA SYSTEM
TH-V70
Consists of XV-THV70, SP-PWV70, SP-XSV70, and SP-XCV70
DIGITAL
DD_
DIGITAL
SURROUND
A,,-,_n.
. ._v
Digital Direct Progressive Scan
DIIF
_VIIFIf
_F
IbJlllWIll
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0865-015A
[A]

Advertisement

Table of Contents
loading

Related Manuals for JVC TH-V70

Summary of Contents for JVC TH-V70

  • Page 1 DVD DIGITAl. CINEMA SYSTEM TH-V70 Consists of XV-THV70, SP-PWV70, SP-XSV70, and SP-XCV70 DIGITAL DIGITAL SURROUND A,,-,_n. . ._v Digital Direct Progressive Scan DIIF _VIIFIf IbJlllWIll INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet.
  • Page 2 Warnings, Cautions and Others Caution -- (_/I button! (XV-THV70) Disconnect the mains plug to shut the power off completely (the (_/I goes off). The O/I button in any position does not disconnect the mains line. • When the system is on standby, the Oil lights red. •...
  • Page 3 IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS _1_ CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE LASER PRODUCT LASS (2_ WARNING LABEL, PLACED INSIDE THE UNIT CAUTION: Visible and i nvisible I/ARNING : Synlig oohJ laser radiation when open and osynlig laserstr_lning n_ir interlock tailed or defeated.
  • Page 4 Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top: No obstructions and open spacing. Sides/Front/Back: No obstructions should be placed in the areas shown by the dimensions below.

  • Page 5: Table Of Contents

    Introduction ........... Advanced operations ......Notes on handling ............. Using the on-screen bar ..........Showing the on-screen bar ..........Checking the supplied accessories ......... Basic operation through the on-screen bar ...... 38 Names of parts controls ....Changing the time information ......... Locating a desired scene from the disc menu ....

  • Page 6: Introduction

    Care of the cabinet Notes on handling When cleaning the system, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Important cautions Do not use benzene, thinner or other organic solvents including disinfectants. These may cause deformation Installation of the system discoloring.

  • Page 7: Names Of Parts And Controls

    See pages in the parentheses for details. Center unit Front panel © © Front panel Moving panel (21) []_ Display window Button name indicators (21) ©/I button (21) [_] SOURCE button (22) (reverse skip) button (30) © © [7] • (stop) button (29) [8] _ (play) button (29) [_] _ (open/close) button (27)
  • Page 8 Display window Display window Signal indicators (34) [_ DSP indicator (34) MUTING) [_ CH indicator (32) Main display • PRO LOGIC II indicator (33) • Digital signal format indicators (33) DOLBY DIGITAL and DTS SURROUND indicator (36) RESUME indicator (29) TUNED indicator (31) [_ STEREO indicator (31,32) [_ AUTO MUTING indicator (32)
  • Page 9 Remote control Remote control Source selecting buttons (22) AUX, FM/AM, DVD [_ AUDIO button (42, 43) [_ ANGLE button (40, 41) [_ RETURN button (39) [_ DIGEST button (45) [_ TOP MENU button (39) [_ MENU button (39, 54) [_ CONTROL buttons VCR (70), TV (20) [_ SLEEP button (24) [_ SETTING button (66)

  • Page 10: About Discs

    Playable disc types This system has been designed to play back the following discs: DVD Video, Video CD, Super Video CD (SVCD), Audio CD, CD-R, and CD-RW. • This system can also play back MP3 and JPEG files recorded on CD-Rs and CD-RWs. For in-depth information about MP3, see "MP3 disc playback"...

  • Page 11: Disc Structure

    Disc structure A DVD Video disc consists of "titles," and each title may be divided into some "chapters." (See Example 1.) For example, if a DVD disc contains some movies, each movie may have its own title number, and it may be further divided into some chapters.

  • Page 12: Getting Started

    Setting the DISP, SET selector You can place the center unit either vertically (on the supplied stand) or horizontally (without the stand) as illustrated below. Before installing the center unit, set the DISP.SET selector according to your selection. • The position of the remote control sensor also changes according to this setting. See page 19. •...

  • Page 13: When Placing The Center Unit Vertically

    When placing the center unit vertically When placing the center unit vertically, attach the supplied stand. 1 Connect the cords by passing them through the holes of the stand as illustrated below. For connections, see pages 10 to 15. System cord, Video cord, Digital optical cord, RCA pin plug cord, and AV COMPULINK cord FM and AM antennas...

  • Page 14: Connections

    Connections • Do not connect the AC power cord until all other connections have been made. • Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect. To view pictures and on-screen displays, connect a TV to the center unit. •...

  • Page 15: Connecting The Fm And Am Antennas

    • Make sure the antenna conductors do not touch any other terminals, connecting cords, and power cords. This could cause poor reception. • AM loop antenna fSetting up AM loop antenna Connecting AM loop antenna Attach the AM loop to its base by snapping the tabs on the loop into the slot in the base.

  • Page 16: Connecting The Powered Subwoofer

    Connect the supplied powered subwoofer (SP-PWV70) using the supplied system cord. • Connect the system cord by matching the • marks on the plugs to the ones on the system and powered subwoofer. Powered subwoofer OM XV-THV70 System cord (supplied) ,,1 _ Ensurethat the =, mark ..
  • Page 17 • Connecting the satellite (front, center, rear) speakers Connect the satellite speakers to the powered subwoofer using the supplied speaker cords. • Connect the white cord to the red (+) terminal and the black cord to the black (-) terminal. CAUTION: •...

  • Page 18: Connecting To An Analog Component

    You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder through this system. Connect an analog component using the cord with RCA pin plugs (not supplied). • Connect the white plug to "AUX IN L" (the left audio jack), the red to "AUX IN R" (the right audio jack). LI _ 0,s_ ben[er...

  • Page 19: Connecting The Power Cord

    Make sure that all connections have been made, before plugging the power cords of the center unit and powered subwoofer. CE.TE.e O _UT_O. I SPEAKER _PE_ER IMP_D_CE LErr ------o Powered subwoofer Centerunit Firmly insert the o_[_t supplied power cord into the '% AC IN socket the rear panel of the center unit.

  • Page 20: Installing The Equipment On The Wall

    Installing the equipment on the wall Using the supplied speaker wall brackets, you can fix the rear speakers to the wall. CAUTION: Attaching the brackets to the wall When attaching the brackets to the wall, have them attached to the wall by a qualified person. DO NOT attach the brackets to the wall by yourself to avoid an unexpected damage due to their falling from the wall, caused by incorrect attachment or weakness in the wall.

  • Page 21: When Attaching The Center Unit To A Wall

    You can attach the center unit to a wall. CAUTIONS: location of attachment to a wall • Take care when selecting a location for attaching the center unit to the wall. Injury to personnel, or damage to the center unit, may result if the center unit is attached in a location which interferes with daily activities, or a location that the users are liable to knock their bodies or heads against the center unit.
  • Page 22 3 Hook the center unit onto the mounted screws, and slide it to left, then down. Make sure that the center unit is attached securely. • Adjust the screws if the center unit is not attached securely. Slide to left, then down. NOTES: •...

  • Page 23: Using The Remote Control

    Using the remote control The remote control makes it easy to use many of the functions of the system at a distance of up to 7 m (23 feet) away. • You can also operate other components from the remote control supplied with this system. - To operate your TV, see page 20.

  • Page 24: Using The Remote Control For Tv Operations

    • Setting the remote control signal for operating your TV. • You can operate your TV without setting the remote control signal if your TV is a TV O/I JVC TV, button 1 Slide the remote control mode selector to "AUDIO/TV/VCR."...

  • Page 25: Basic Operations

    This section mainly explains operations commonly used when you enjoy this system. • This manual mainly explains operations when the center unit is placed vertically (the DISRSET selector is set to "V") as an example. • Turn also on your TV and select the correct input mode on the TV. IM PORTANT: When using the remote control, check to see if its TVJVCR'I,,H I...

  • Page 26: Selecting The Source To Play

    To turn power off From the remote control: Press AUDIO ©/I again. On the center unit: Press ©/I again. The illumination lamps and the button name indications (except the ©/I indicator) go off. • When placing the center unit vertically, the moving panel closes. •...

  • Page 27: Turning Off The Sound Temporarily

    RM-STHV70U DVD CINEMA SYSTEM Turning off the sound temporarily From the remote control ONLY: Press MUTING. "MUTING" appears on the display window and the volume turns off. .. • ..= = -.= = ..= ,, ...._'.'_ _"r" T 1. 1:'". To restore the sound Press MUTING again.

  • Page 28: Turning Off The Power With The Timer

    Turning off the power with the timer Using the sleep timer, you can fall asleep while listening to music, and know the system will turn off by itself rather than play all night. From the remote control ONLY: Press SLEEP. Each time you press the button, the shut-off time changes as follows: =:>0min (cancelled) _>...

  • Page 29: Changing The Decode Mode

    FM/AM AUDIO ANGLE SUBTITLE DECODE RETURN DIGEST ZOOM (::Z) (::Z) C_C)- MENU dTo% %T E.T%® ..TV RETURN FM MODE 100+ CHANNEL VOLUME Changing the decode mode When you play a disc (or software) encoded with Dolby Digital or DTS Digital Surround, the following symptoms may occur: •...

  • Page 30: Changing The Scan Mode

    In such a case, change the scan mode to "INTERLACE." To check the compatibility of your TV, contact your local JVC customer service center. • All JVC progressive TVs and High-Definition TVs are fully compatible with this system.

  • Page 31: Basic Playback

    This section explains basic operations for playback of DVDs, VCDs, SVCDs, and Audio CDs. For MP3 playback, see page 51. For JPEG disc playback, see page 53. • [][][][]shows the types of discs the operation is available for. • Before operating the DVD player from the remote control, press DVD to use the remote control for the disc operations. •...

  • Page 32: Stopping Playback Temporarily

    2 Insert a disc into the disc slot with the label side facing the front or up as shown below. Insert a disc halfway, then it is pulled into the center unit automatically. • When the center unit is placed vertically •...

  • Page 33: Stopping Playback Completely

    Stopping playback completely PressSTOP From the remote control: On the center unit: Press n. • When the resume playback is set to "ON" (see page 62): Once you press the button, playback stops and the position where playback has been stopped is stored.

  • Page 34: Searching For A Particular Point

    Searching for a particular point You can search for a particular point while playing a disc. • Method 1 (from the remote control ONLY): To fast-forward playback, press I_1_ during playback. Each time you press the button, the search speed changes as follows. To fast-reverse playback, press _ during playback.

  • Page 35: Tuner Operations

    You can browse through all the stations or use the preset function to go immediately to a particular station. • Before operating the tuner from the remote control, press FM/AM to use the remote control for the tuner operations. 2 PressTUNING UP (FF/_,_t) or DOWN (l_/ IM PORTANT: REW) repeatedly until you find the frequency When using the remote control, check to see if its...

  • Page 36: Selecting The Fm Reception Mode

    Press MEMORY ( • REC}. Selecting the FM reception The channel number position starts flashing on the mode display window for about 5 seconds. When a stereo FM program tuned in currently is noisy, you " " :i ii. _J_D STEreO AUTO MUTING can change the FM reception mode to improve the reception.

  • Page 37: Creating The Realistic Sound Fields

    You can use the following Surround modes to reproduce a realistic sound field. • Dolby Surround Dolby Digital* • Dolby Pro Logic II Used to reproduce multichannel soundtracks of the software • Dolby Digital encoded with Dolby Digital (BB_). • DTS Digital Surround Dolby Digital 5.1 ch (DOLBY D) encoding method (so-called •...

  • Page 38: Dap Modes

    • DAP (Digital Acoustic Processor) modes • All Channel Stereo DAP modes have been designed to create important All Channel Stereo (ALL CH ST.) mode can reproduce a acoustic surround elements. larger stereo sound field using all the connected (and activated) speakers.

  • Page 39: Selecting The Surround Mode

    IM PORTANT: Using Dolby Pro Logic II, Dolby When using the remote control, check to see if its TV/VCRlmIm I Digital and DTS Digital Surround A00,oJ i_lr--1 remote control mode selector is set to the correct CATV/DBS position: To operate this system, set it to "AUDIO/'rv/vcR." Once you have adjusted the sound, the adjustment memorized for each source.

  • Page 40: Using Dap Modes And All Channel Stereo

    5 Adjust the speaker output levels Press SURROUND MODE repeatedly until one (-10 dB to +10 dB). of the DAP modes--'LIVE CLUB," "DANCE CLUB," "HALL," "PAVILION'--or "ALL CH ST." Adjust the center speaker and rear speaker levels comparing to the sound from the front speakers. appears on the display.

  • Page 41: Advanced Operations

    This section explains advanced operations of DVD, Video CD, SVCD, and Audio CD playback using the remote control. For MP3 playback, see page 51, and for JPEG playback, see page 53. • [][][][] shows the types of discs the operation is available for. •...

  • Page 42: Basic Operation Through The On-Screen Bar

    Selectthisto play backtracksin yourdesired order See page 49. Selectthisto play backtracksinrandom order. See page 49. You can change the time information in the on-screen bar and the display window on the center unit. • During playback or while stopped. EX.: When selecting the repeat mode: ON SCREEN button Cursor and...

  • Page 43: Locating A Desired Scene From The Disc Menu

    Locating a desired scene from the disc menu Using the disc menu, you can start playing a title, chapter, or track you specify. A Video CD or SVCD disc recorded with PBC has its own menus such as a list of the songs. You can locate the specific scene by using the menu.

  • Page 44: Selecting A View Angle Of Dvd

    Using the on-screen bar: Selecting a view angle of DVD Ou SORE While playing back a DVD containing multi-view angles, you sooBN "_,,o, can enjoy the same scene at different angles. Cursor and ENTER buttons • During playback Using the direct button" 1 Press ON SCREEN twice.

  • Page 45: Showing All View Angles On The Tv

    Changing the subtitle languages and audio languages While playing back a DVD (or SVCD) containing subtitles in different languages, you can select the subtitle language to be displayed on the TV. When a DVD contains audio languages (soundtrack), can select the language (soundtrack) to listen to.

  • Page 46: Selecting The Audio Language

    Using the on-screen bar: ... SCREEN AUDIO ON SCREEN Using the direct button: Cursor and ENTER buttons button • During playback ] Press ON SCREEN twice. AUDIO ANGLE SUBTITLE DECODE AUDIO button The on-screen bar appears on the TV screen. RETURN DIGEST ZOOM...

  • Page 47: Selecting The Audio Channel

    Using the on-screen bar: SCREEN AUDIO ON SCREEN When you play some Karaoke Video CDs or SVCDs, you can Cursor and enjoy karaoke by selecting the audio channel to play. u.on ENTER buttons • The sounds of each audio channel depends on the contents of the disc.

  • Page 48: Playing From A Specified Position On A Disc

    Using the on-screen bar: Playing from a specified position on a disc SCREEN AUDIO ON SCREEN You can start playing a title, chapter, or track you specify..Cursor and You can also play a disc from the specified time. ENTER buttons button •...

  • Page 49: Locating A Desired Position By Specifying The Time

    4 PressENTER. The system starts playback from the specified time. To turn off the on-screen bar Press ON SCREEN. NOTES: You can start playing at your desired position by specifying • You can also use the 10 button to enter "0." the elapsed playing time from the beginning of the current •...

  • Page 50: Special Picture Playback

    • While a DVD is stopped: Special picture playback The opening scene of each title appears on the TV screen. This system provides special picture playback functions • During DVD playback: including frame-by-frame, strobe, slow-motion and zoom. The opening scene of each chapter in the current title appears on the TV screen.

  • Page 51: Playing Back In Slow-Motion

    To return to the normal screen Press and hold STROBE(PAUSE)for more than 1 second. NOTES: • If you press and hold STROBE (PAUSE) for more than 1 second during playback, 9 still pictures also appear but they advance in normal playback speed with a time delay. (The sound is muted.) •...

  • Page 52: Changing The Vfp Setting

    To adjust USER 1 or USER 2 Press VFP(PROGRESSIVE), then pressCursor I_/<1 repeatedly to select "USER 1" or "USER2." The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programming, picture tone or personal preferences. Before you start, remember...

  • Page 53: Changing The Track Order

    To erase a step Changing the track order Press Cursor A/• to move _ to the desired step, then press STOR You can play tracks on a Video CD, SVCD or Audio CD in the To program the next steps again, press Cursor • repeatedly to desired order or in random order.

  • Page 54: Repeat Playback

    To turn off the on-screen bar Repeat playback Press ON SCREEN. You can repeat playback of the current title or chapter (for To cancel the repeat playback DVD Video) or track (for Video CD/SVCD/Audio CD). Repeat from step 1, select "OFF" in step 3, then press You can also repeat playback of a desired part.

  • Page 55: Mp3 Disc Playback

    This system can play MP3 files recorded on a CD-R or CD-RW (MP3 disc). • Before performing the operation in this section from the remote control, press DVD to use the remote control for the MP3 disc operations. • Turn on your TV, and select the correct input mode on the TV. •...
  • Page 56 Operations through the MP3 • Operations control display You can search and play the desired groups and tracks E Number buttons through the MP3 control display. • MP3 control display Cursor and ENTER buttons Track number --Current group indication* -Group number [_ Elapsed playing time TVVOL...

  • Page 57: Jpeg Disc Playback

    This system can play JPEG files such as the digital photographs recorded on a CD-R and CD-RW (JPEG disc). • Before performing the operation in this section from the remote control, press DVD to use the remote control for the JPEG disc operations.
  • Page 58 NOTES: • To stop the slide-show playback completely • You can check only the current file number on the display window. Press STOP (or• onthe unit). center • Some group and file names may not be displayed correctly because of the recording condition. The JPEG control display appears on the TV screen.

  • Page 59: Setting Dvd Preferences

    You can adjust the initial setting of DVD player according to your preference or needs through the choice menus shown on the TV screen. Before performing the operations in this section, press DVD on the remote control to change the source to DVD. •...

  • Page 60: Basic Procedure Through The Choice Menus

    4 Press ENTER. The pop-up window, listing the selectable options, appears on the choice menu. TV RETURNFMMODE 100+ ON mm SCREEN AU0EO, ¸ Cursor and II ..ENTER buttons II t_ _ button 5 PressCursor A/v repeatedly to select the Press CHOICE.

  • Page 61: Language Menu

    LANGUAGE menu NOTE: You can select "MENU LANGUAGE," "AUDIO LANGUAGE," and "SUBTITLE" only while playback is stopped. Items Contents and guidelines MENU LANGUAGE Some DVDs have their own menus in multiple languages. • Select the initial language ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, and shown in the menus, language codes from AA to ZU (see below) AUDIO LANGUAGE...

  • Page 62: Picture Menu

    PICT URE rnenu Items Contents and guidelines MONITOR TYPE • 16:9 NORMAL (Wide television conversion) Select this when the aspect ratio of your TV is fixed to 16:9 You can select the monitor type (wide TV). to match your TV when you play DVDs recorded in the picture's The system automatically adjusts the screen width of the output...

  • Page 63: Audio Menu

    AUDIO menu Items Contents and guidelines L/R BALANCE L -21 to L-1 __ CENTER __ R -1 to R -21 (by 1 step) • CENTER Adjust the balance between the left front speaker and right front The outputs of the left and right front speakers are identical. •...

  • Page 64: Spk. Setting Menu

    SPK. SETTING menu Items Contents and guidelines SIZE Enters the SIZE sub-menu (the speaker size setting menu). (See below.) LEVEL Enters the LEVEL sub-menu (the speaker level setting menu). (See page 61 .) DISTANCE Enters the DISTANCE sub-menu (the speaker distance setting menu). (See page 61 .) CROSS OVER* 200 Hz (Select this when using the supplied speakers.
  • Page 65 NOTE: When "NONE"is selected for the center speaker or rear speakers in the SIZE menu, you cannot enter the LEVEL menu.(See page 60.) Items Contents and guidelines CENTER SPEAKER* LEFT REAR SPEAKER* RIGHT REAR SPEAKER* Within the range from -10 dB to +10 dB. (by 1 dB step) SUB WOOFER Adjust the output level of those speakers.

  • Page 66: Others Menu

    OTHERS menu NOTE: You can select "PARENTAL LOCK" only while playback is stopped. Items Contents and guidelines RESUME • ON You can activate or deactivate Select this to activate this function. the resume playback function. • OFF Select this to deactivate. ON SCREEN GUIDE •...

  • Page 67: Restricting Playback By Parental Lock

    4 PressCursor A/v repeatedly to select the Restricting playback by Parental country code, then press ENTER. Lock See "Country/Area codes list for Parental Lock" on page Using this function, you can restrict playback of a DVD containing violent scenes and those not suitable for your The _ moves to "LEVEL."...

  • Page 68: Changing The Setting Of Parental Lock

    When you set a strict parental level, some discs may not be played back at all. When you load such a disc and try to play From the remote control ONLY: it, the following display appears on the TV screen. You can release Parental Lock temporarily.
  • Page 69 Country/Area codes list for Parental Lock Andorra Eritrea Rwanda Lao People's Saudi Arabia United Arab Emirates Spain Democratic Republic Lebanon Solomon Islands Afghanistan Ethiopia Saint Lucia Antigua and Barbuda Finland Seychelles Liechtenstein Sudan Anguilla Fiji Sri Lanka Sweden Albania FalklandIslands(Malvinas) Armenia Micronesia Liberia...

  • Page 70: Window

    You can adjust the sound and speaker settings of this system through the display window. • You can adjust the sound setting of front speakers ("BAL," "BASS," and "TREBLE") for each source. • The adjustments of the speaker size, speaker distance, "LFE ATT," "CROSS," and "D. COMP" take effect for all sources. See the corresponding pages for the detail of adjustments.

  • Page 71: Av Compu Link Remote Control System

    The AV COMPU LINK remote control system allows you to operate JVC TVs through the center AIJf'*¢'ldlJDI I I IlLIIf unit. To use this remote control system, follow the diagrams and procedure explained here. _VlVlf klIVI_L • The AV COMPU LINK setting is performed in the OTHERS menu of the choice menus.
  • Page 72 2 Set the AV COMPU LINK setting in the OTHERS menu, and the VCR's remote control code setting as follows. See page 62 to set the AV COMPU LINK setting. • When connecting to the VIDEO-3 (DVD) input jack of the TV: Select "DVD1"...

  • Page 73: Equipment

    DBS tuner, try each one until you enter the correct one. Manufacturers' codes for CATV converter or DBS tuner Manufacturer Code Echostar GI Jerrold 01,02, 03, 04, 05, 06, 07, 08 Hamlin/Regal 15, 16, 17, 18 ,JVC Pioneer 13, 14 RM_STHV70U DVD CINEMA SYSTEM Scientific Atlanta 09, 10 Sony Zenith...

  • Page 74: Using The Remote Control For Vcr

    Using the remote control for VCR • For operating your VCR ] Slide the remote control mode selector to "AUDIO/TV/VCR." hold 2 Press and VCR ©/I. Keep it pressed until step 4 is finished. 3 Press VCR CONTROL. E VCR O/I 4 Press NumBer Buttons (1-9, O) to enter a manufacturer's code AUDIO ANGLE...

  • Page 75: Maintenance

    To get the best performance of the system, keep your discs and mechanism clean. General Notes Cleaning the system In general, you will have the best performance by keeping • Stains on the system your discs, and the mechanism clean. Should be wiped off with a soft cloth.

  • Page 76: Troubleshooting

    Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center. PROBLEM POSSIBLE CAUSE SOLUTION Power does not come on. The power cord is not connected to an Insert the plug into the socket.
  • Page 77 PROBLEM POSSIBLE CAUSE SOLUTION Sound from one front speaker The speaker cord is not connected Connect the cord correctly. only. correctly. (See page 13.) Left-right balance is not set properly. Adjust the balance properly. (See pages 59 and 66.) No sound from the center and/or The speaker setting is incorrect.
  • Page 78 PROBLEM POSSIBLE CAUSE SOLUTION No MP3 files are recorded on the disc. A disc cannot be played. Replace the disc. MP3 files do not have the file extension Add the file extension--.mp3, .Mp3, --.mp3, .Mp3, .mP3, or .MP3 in their file .mP3, or .MP3--to their file names.

  • Page 79: Glossary

    Aspect ratio Multi-angle The ratio of vertical and horizontal sizes of a displayed By recording multiple scenes progressing at the same time in image. The horizontal vs. vertical ratio of conventional TVs is a single title, the user can select view angles. This feature is 4:3, and that of wide-screens is 16:9.

  • Page 80: Specifications

    • Center unit (XV-THV70) Tuner section Audio section Total Harmonic Distortion 0.02 % Tuning Range 87.50 MHz - 108.00 MHz NOTE: This value is measured at System cord CONNECTORfor reference. 531 kHz- 1 602 kHz (at 9 kHz intervals) Audio input sensitivity/Impedance (at 1 kHz) 530 kHz - 1 600 kHz Analog input:...
  • Page 81 • Accessories • Subwoofer (SP-PWV70) Amplifier section Remote control (1) Front/Center/Rear: 30 W per channel, RMS at Batteries (2) 4 _:_at 1 kHz, with 10 % Stand (1) (for the center unit) total harmonic distortion. Legs (2) (for the stand) Subwoofer: 140 W, RMS at 4 _:_ at 100 FM antenna (1)
  • Page 82 VICTOR COMPANY OF JAPAN, LIMITED 0602TMMMDWJEM...

This manual is also suitable for:

Xv-thv70Sp-pwv70Sp-xsv70Sp-xcv70

Table of Contents