Connecting To An Analog Component; Connecting To A Digital Component - JVC TH-V70 Instructions Manual

You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder through this system. Connect an
analog component using the cord with RCA pin plugs (not supplied).
• Connect the white plug to "AUX IN L" (the left audio jack), the red to "AUX IN R" (the right audio jack).
NOTES:
-
LI _ I 0,s_ _ -- I ben[er unit
L RCA pin plug cord
I.......................... ........................ ",
']_ i
_ o aud o output ,
t _ To audio _" ',
!VI output
II II :
@ _.. _To audio output
VCR TV Cassette recorder
If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound output
through this system may be distorted.
When playing a video component such as a VCR:
- To listen to the sound, operate this system. (Select "AUX'as the source to play. See page 22.)
- To see the picture, connect the video output jack of the component to the video input jack of the TV, and select the correct input mode on
the TV.
You can enjoy the sound of a digital component such as a DBS tuner or MD recorder through this system. Connect a digital
component using the digital optical cord (not supplied).
_=_=_= _ _ ........ .,
" )
DBS tuner
', DIGITAL =X "m Before connecting a
[_ =]"_ -- ' -- ,I _1 /v<J_.. dgta optca cord II
_ _¢_ h_ un_lu _ the _rotective II
_=_=1_] i i_ Digital optical cord ! L
L0=,0=
MD recorder
TO SP-PWV70 AUX IN
e_ 7s VIOEO T '
uen[er unit O=SP.SE_ _
NOTES:
When playing a video component such as a DBS tuner:
• To listen to the sound, operate this system. (Select "AUX DIGITAL"as the source to play. See page 22.)
• To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the correct input mode
on the TV.
14