Window - JVC TH-V70 Instructions Manual

You can adjust the sound and speaker settings of this system through the display window.
• You can adjust the sound setting of front speakers ("BAL," "BASS," and "TREBLE") for each source.
• The adjustments of the speaker size, speaker distance, "LFE ATT," "CROSS," and "D. COMP" take effect for all sources.
IM PORTANT:
When using the remote control, check to see if
its remote control mode selector is set to the
correct position:
To operate this system, set it to "AUDIO/TV/
VCR."
A0o,o, F-1 l
TV/VCR "_ I
CATV/DBS ju [_
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
• When selecting DVD, AUX, orAUXDIGITAL as the source, the
settings of the corresponding items in the choice menus also
change.
From the remote control ONLY:
SETTING m
button
ENT%....
(Z)
TV_ETURN FMMODE 100+
TVVOL CHANNEL VOLUME
Cursor and
ENTER buttons
2
Press SETTING.
The item you last selected appears on the display
window.
Example: "BAL" has been selected.
" " iiii',Ai .... C:Ei..iTEF;I:
Press Cursor v/A repeatedly to select the
item you want to set.
Each time you press the button, the items shown on the
display window change as follows:
__ BAL __ BASS _TREBLE __ FRNT SP
__ CNTR SP __ REAR SP __ FRNT D __ CNTR D
__ REAR D __ CROSS __ LFE ATT. __ D.COMP
,__ (back to the beginning)
See the corresponding pages for the detail of adjustments.
• BAL (Balance):
Adjust the balance between the left and right front
speakers. (See page 59.)
• BASS, TREBLE:
Adjust the enhancement level for bass or treble sound
from the front speakers. (See page 59.)
• FRNT SP (front speakers),
CNTR SP (center speaker),
REAR SP (rear speakers):
Select the size of each speaker. (See page 60.)
• FRNT D (front speakers distance),
CNTR D (center speaker distance),
REAR D (rear speakers distance):
Set the distance from the listening position to the
speakers. (See page 61 .)
• CROSS (CROSS OVER):
Select the cutoff frequency of the subwoofer according
to the front speakers used with this system.
(See page 60.)
• LFE ATT.:
Diminish the distortion of the bass sound from the
subwoofer while playing back a disc with Dolby Digital
or DTS Digital Surround. (See page 59.)
• D.COMP (D. RANGE COMPRESSION):
Enjoy a powerful sound at night even at a low volume
level when listening to the sound with Dolby Digital.
(See page 59.)
3
Press Cursor </m,- to make an adjustment.
Example:
"" iiii:i:::ii ....R ..... =; %,,,
• BAL:
"L-21" to '%-1" __ "CENTER" __ "R-1" to "R-21"
• BASS, TREBLE:
Within the range between -10 to +10 (by 2 step)
• FRNT SP, CNTR SP, REAR SP:
"SML" (small) __ "LRG" (large) ,__ "NO" (none)
("NO" is not selectable for the front speakers.)
• FRNT D, CNTR D, REAR D:
Within the range between 0.3 m and 9.0 m. (by 0.3 m
step)
• CROSS:
"200 Hz" __ "150 Hz" __ "120 Hz" __ "100 Hz"
__ "80 Hz"
• LFE ATT.:
"ON" _ "OFF"
• D.COMP:
"MID" __ "MAX" __ "OFF"
4 Repeat steps 2 and 3 to set other items.
NOTES:
• If you have selected "SML" for the front speakers, you cannot select
"LRG" for the center and rear speakers.
• You can confirm your adjustment of speaker settings by listening to
the test tone. To output the test tone, press SOUND, then TEST.
(See page 35.)
66