Changing The Vfp Setting - JVC TH-V70 Instructions Manual

The VFP (Video Fine Processor) function enables you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
Before you start, remember...
There is a time fimit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
AUDIO ANGLE SUBTITLE DECODE
(:::Z) _ (::Z) (::Z)
RETURN DIGEST ZOOM VFP
TOP MENU MENU ZOOM
® . ...
TV_ETURN FMMODE
TVVOL CHANNEL VOLUME
m VFP
(PROGRESSIVE)
button
Cursor and
ENTER buttons
• During playback
] Press VFP (PROGRESSIVE).
The current VFP settings appear on the TV.
Example: When "NORMAL" is selected,
2 PressCursor
I_/<
repeatedly to select the
VFP mode.
Each time you press the button, the VFP mode changes
as follows.
.__ NORMAL .__ CINEMA .__ USER 1 .__ USER 2
.__ (back to the beginning)
• NORMAL:
• CINEMA:
• USER 1 and USER 2:
Normally, select this.
Suitable for a movie source.
You can adjust parameters that
affect the appearance of
picture and store the settings.
NOTE:
You cannot adjust "NORMAL" and "CINEMA."
To adjust USER 1 or USER 2
Press VFP(PROGRESSIVE), then pressCursor
I_/<1
repeatedly to select "USER 1" or "USER2."
2
3
PressCursor v/Arepeatedly to select a
parameter you want to adjust.
• Adjust gradually to show preferable appearance by
confirming the picture.
• GAMMA:
Controls the brightness of neutral tints while maintaining
the brightness of dark and bright portions (-4 to +4).
• BRIGHTNESS:
Controls the brightness of the screen (-16 to +16).
• CONTRAST:
Controls the contrast of the screen (-16 to +16).
• SATURATION:
Controls the color depth of the screen (-16 to +16).
• TINT:
Controls the tint of the screen (-16 to +16).
• SHARPNESS:
Controls the sharpness of the screen (+0 to +3).
• Y DELAY:
Controls the color gap of the screen (-2 to +2).
Press ENTER.
VFP menu disappears, and the following pop-up window
appears on the TV.
4 PressCursor
A/V
repeatedly to change the
setting.
5 PressENTER.
6
The current VFP settings appear again.
Repeat steps 2-5 to
adjust
other parameters.
To return to the normal screen
Press VFP (PROGRESSIVE).
To activate your setting
Press VFP (PROGRESSIVE), then press Cursor P-/<
repeatedly to select "USER 1" or "USER 2,"
NOTE:
The VFP settings disappear if no operations are done for more than
about 10 seconds.
48