JVC TH-V70 Instructions Manual page 17

• Connecting the satellite (front, center, rear) speakers
Connect the satellite speakers to the powered subwoofer using the supplied speaker cords.
• Connect the white cord to the red (+) terminal and the black cord to the black (-) terminal.
CAUTION:
• When you do not connect the supplied speakers but connect other (larger) speakers, use the speakers with the SPEAKER IMPEDANCE
indicated by the speaker terminals on the rear panel of the subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
f
Before connecting the speaker cord
] 2
If the speaker cord is
covered with vinyl,
remove the vinyl by
twisting it as shown
above.
0
0
Fold the end of each
speaker cord to avoid
short-circuit.
Front speakers*
(SP-XSV70)
0
P
Center speaker (SP-XCV70)
Rear speakers*
(SP-XSV70)
_;_, roove
0
('Connecting the speaker cord to the satellite speakers
The terminal of SP-XSV70
Press and hold the
terminal clamp.
2 3
Insert the speaker
cord.
Release the finger from the
terminal clamp.
Connect the Let the cables
speaker cords, pass through the
groove.
0
Powered subwoofer
o
o
Connecting the speaker cord to the powered subwoofer
] 2 3
Open the terminal Insert the speaker Close the terminal
clamp, cord. clamp.
13