Compatible Lenses - Nikon D60 User Manual

Compatible Lenses
11 Range of rotation for A180-200mm f/2.8 ED tripod mount is limited by camera body. Filters can not be
exchanged while A1200-400mm f/4 ED is mounted on camera.
12 Electronic analog exposure display is not available.
13 {}an be used in manual exposure modes at shutter speeds slower than
1/125 S,
Electronic analog
exposure display is not available.
14 Exposure compensation required when used with A128-85mm f/3.5-4.5, A135-105mm f/3.5-4.5, A135-
13Smm f/3.5-4.5, or AF-S 80-200mm f/2.8D. Seeteleconverter manual for details.
15 Hold the camera in "tall" (portrait) orientation when attaching the Bellows Focusing Attachment PB-6.
Once the PB-6 is attached, the camera can be repositioned in "wide" (landscape) orientation if
necessary.
• Reprocopy Outfit PF-4 requires Qamera Holder PA-4.
Incompatible Accessories and Non-CPU Lenses
The following accessories and non-CPU lenses carl NOT be used with tile D60:
• AF Teleconverter TC-16A • Lenses for tile F3AF (AF 80ram f/2.8,
• Non-AI lenses
• Lensesthat require tile Focusing Unit AU-1 (400ram
f/4.5, 600ram f/5.6, 800ram f/8, 1200ram f/11)
• Fisheye (6ram f/5.6, 7.5ram f/5.6, 8ram f/8, OP 10ram
f/5.6)
• 2.1cm f/4
• Extension Ring K2
• 180-600mm f/8 ED(serial numbers 174041-174180)
• 360-1200ram f/11 ED(serial numbers 174031-
174127)
• 200-600ram f/9.5 (serial numbers 280001-300490)
[] Lenses for Autofocus
AF200mm f/3.5 ED,AFTeleconverter
TC-16)
• PC 28ram f/4 (serial number 180900 or
earlier)
• PC 35mm f/2.8 (serial numbers 851001-
906200)
• PC 35ram f/3.5 (old type)
• Reflex l O00mm f/6.3 (old type)
• Reflex 1000mm f/1 (serial numbers
142361-143000)
• Reflex2000mm f/1 (serial numbers
200111-200310)
Autofocus with this camera is supported only by AF-Sand AF-I lenses.AF-Sand AF-I lenses are
equipped with an autofocus motor. Autofocus is not possible when any other type of lens is
mounted, regardlessof tile autofocus capabilities of tile lens itself.
[] Lens f-number
The f-number included at the end of lens names (e.g., f/2.8 or f/3.5-5.6) is tile maximum aperture of
the lens.
[] Recognizing CPU and Type G and D Lenses
CPU lenses carl be identified by the presence of CPU contacts, type G and D lenses by a letter on tile
lens barrel.Type G lenses are not equipped with a lens aperture ring.
CPU contacts Aperture ring
O
)>
R
¢D
CPUlens Type G lens Type D lens
147