Viewing Tile System Status - Toshiba 40G300U Owner's Manual

After the time zone has been set, you will be asked to
set the current Daylight Saving Time status.
To set the Daylight Saving Time status:
1 Press 4 or I_ to select Yes or No, highlight Done,
and then press @.
Viewing the system status
To view the system status:
MENU
Press O and open the Setup menu.
2 Highlight
Instaliati0n
and press @.
3 A new set of installation menu icons will appear.
Open the
System Status
menu, highlight
System
]nf0rmati0n,
a nd press @.
4' Press 41_ to scroll through the menu bar to select
the Factory Defaults or Support information
and
view the related information.
To close the screen and return to the
Installation menu:
Highlight D0ue and press @.
To return to normal viewing:
EXIT
Press O.
Reset Factory Defaults
To reset all settings and channels to their
factory default values:
MENU
Press O and open the Setup menu.
Highlight
Instaiiati0n
and press @. A new set of
installation menu icons will appear.
3 Open the
System Status
menu, highlight
System
information,
and press @.
Press 411_ to scroll through the menu bar to select
Factory Defaults.
5
Highlight
Yes
and press @Ej_.
6 (If PIN code has been set, enter your PIN ccxte, tS"ess
4 or _" to select D0ue and press @.)A warning
message will appear, select Yes and press @, the TV
will turn off automatically after a few seconds. After
the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset:
Select N0 and press @ in step 5 above.
34