Selecting The Menu Language; Viewing The Digital Signal Meter; Configuringthe Antenna Input Source For The Ant/Cable Terminal; Viewing The System Status - Toshiba 26AV500U Owner's Manual

Selecting the menu language Viewing the digital signal meter
You can choose from three different languages (English,
French and Spanish) for the on-screen display of menus and
messages.
To select the menu language:
1 MENU
Press © and ()pen the Setup menu.
2 Highlight Menu Language.
3
Press _ or @ to select your prefened menu language.
EXIT
Press © to close the Setup menu.
Configuringthe antenna input
You can view the digital signal meter in the ANT digital TV
input source only.
To view the digital signal meter:
"1 Press M_U and open the Setup menu.
2
Highlight DTV Signal
Meter.
3
Press _ or @, a new- set of DTV
Signal
Meter menu
icons will appear as shown below-.
Viewingthe systemstatus
source for the ANT/CABLE terminal
To configure the ANT input source:
1 MENU
Press © and open the Setup menu.
2 Highlight input Configuration.
3
Press _ or@ to select the input source (Cable or
Antenna) which input signal connecting to ANT/
CABLE terminal on the TV.
To view the system status:
"!
Press M_U and open the Setup menu.
2 Highlight System Status.
3
Press I_ or@, the System information menu will
appear as below-.
N
29