Using Tile Dolby _' Digital Dynamic Range Control Lcature; Using Tile Locks Nlenu; Entering Tile Pin Code; If You Cannot Lxunember Your Pin Code - Toshiba 40G300U Owner's Manual

Usingthe Doiby® Digital Dynamic
RangeControlfeature
This dynamic range control feature causes the ATSC
dynamic range to be further comwessed, allowing
you to switch from ATSC to analog broadcasts at the
same dynamic range.
To use tile Dolby Digital Dynamic Range
Control:
MENU
Press O and open the Sound menu.
2 Highlight AUdiOSetup and press @.
3 [n the D0Jby Digital
Dynamic R angeC0ntr01
f ield,
select Compressed. When Standard is selected,
the audio is output with minimal compression.
4 To save the new settings, highlight [}oRe and
press @.
To revert to the factory defaults, highlight
Reset
and press @.
Note:
° This item wi//be grayed out for NTSC signals,
Video, ColorStream, and PC inputs.
° The Dolby Digital Dynamic Range Control will
function in relation to Optical Output Format
(PCM mode).
Using the Locks menu
The Locks menu includes the Enable Rating
Blocking, Edit Rating Limits, input Lock, Front
(Control) Panel Lock, GameTimer, and New PIN
Code features. You can use these features after
entering the correct PIN code.
Enteringthe PiN code
MENU
Press (2) and highlight the Locksmenu icon.
PIN code has not been stored. Press the Channel
Number buttons to enter a new four-digit code,
enter the code a second time to confirm, and
press @.
• The
Locks/Active
screen appears if the PIN code
is already stored. Use the Number buttons to
enter your four-digit code and press @.
If the wrong PIN code is entered, the message
"Incorrect PIN code, please try again !" appears.
Highlight
Retry and press @.
Enter the code again
and press @.
When the correct PIN code is entered, the Locks menu
opens.
Note:
PiN code can not be set to "0000".
If you cannot remember your PIR code
While the PIN code entering screen is displayed, press
RECALL ....
be cleared and you can enter a new PIN code.
Changingyour PiN code
MENU . .
1 Press 0 and h@_hght the Locksmenu icon.
Press Y to display the PIN code entering screen.
Enter your four-digit PIN code and press @.
Press Y to highlight New Pill Codeand press @.
5 Press the Number buttons to enter a new four-
digit code. Reenter the PIN code to confirm it.
6 Press @. The new PIN code is now active.
Note:
PIN code can not be set to "0000".
Press V, which displays the PIN code entry
screen.
* The Lock System screen (below) aF_pears if a
BlockingTV programsand movies
by rating (V-CNp)
Some TV programs and movies include signals that
classify the content of the program (violence, sex,
(con fin ued)
45