Setup/Hlstallation Menu Layout; Navigating The Menu System - Toshiba 40G300U Owner's Manual

Setup/installation menu layout
The Installation menu contains the Terrestrial and System Status menus.
MENU
To open
the Installation
menu (illustrated below), press O on the remote control or TV control panel, open the
Setnp menu, select
installation,
and press @.
Terrestrial
Input Configuration _ [Opens the Input Configuration menu]
Channel Program _ [Start] _ [Scans for new channels on ANT/CABLE]
Channel Options _ [Opens the Skip / Lock Channel menu]
Channel Tuning Mode _ Standard / Auto / Digital
Eastern / Newfoundland / Atlantic / Hawaii / Alaska /
Time Zone
Pacific / Mountain / Central
Signal Meter _ [Opens the Signal Meter menu]
STstemStains
System Information --[Opens the System Information screen]
Navigating the menu system
You can use the buttons on the remote control or TV
control panel to access and navigate your TV's on-
screen menu system.
MENU
,, Press © to open the menu system.
Note;
The menu background may sometimes appear
black, depending on the signal the TV is
receiving. This is not a sign of malfunction.
,, When a menu is open, use the up/down/left/right
arrow buttons (at V',9 I1_) on the remote control
or TV control panel to move in the corresponding
direction in the menu.
,, Press @ to save your menu settings or select
a highlighted item. (A highlighted menu item
appears in a different color in the menu.)
,, All menus close automatically if you do not make
a selection within 60 seconds, except the signal
meter menu, which closes automatically after
about 5 minutes.
EXtT
,, To close a menu instantly, press O •
29