Viewing The System Status - Toshiba 40G30U Owner's Manual

After the time zone has been set, you will be asked to
set the current Daylight Saving Time status.
To set the Daylight Saving Time status:
1 Press W or X to select Yes or No, highlight Done,
and then press .

Viewing the system status

To view the system status:
1
Press and open the Setup menu.
2
Highlight Installation and press
3
A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Information, and press
4 Press WX to scroll through the menu bar to select
the Factory Defaults or Support Information and
view the related information.
To close the screen and return to the
Installation menu:
Highlight Done and press
To return to normal viewing:
Press .
Reset Factory Defaults
To reset all settings and channels to their
factory default values:
1
and open the Setup menu.
Press
2
Highlight Installation and press
Installation menu icons will appear.
3
Open the System Status menu, highlight System
Information, and press
4 Press WX to scroll through the menu bar to select
Factory Defaults.
5
Highlight Yes and press
6
(If PIN code has been set, enter your PIN code. Press
W or X to select Done and press
message will appear, select Yes and press
will turn off automatically after a few seconds. After
the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset:
Select No and press in step 5 above.
34
Chapter 5: Setting up your TV
.
.
.
. A new set of
.
.
.) A warning
, the TV