Viewing The System Status - Toshiba 32HL95 Owner's Manual

Viewing the system status

To check the system status:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown
below right).
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
PC Audio No
HDMI Audio Auto
Gray Level 2
Navigate Select CH RTN Back EXIT Exit
3. Open the System Status menu, highlight System
Information, and then press ENTER.
4. Use x • to scroll through the menu bar to check the
Product Information and Software Version.
System Information
Product Information
Brand: Toshiba
Model: 32HL95
O K
To close the screen and return to the Installation menu:
Highlight OK and press ENTER.
To return to normal viewing:
Press EXIT.
Restore Factory Defaults
To restore all settings and channels to their factory default
values:
1. Follow steps 1–3 above.
2. Use x • to scroll through the menu bar to select Factory
Defaults.
3. Enter your PIN code (or 0000 if no PIN code has been set).
To cancel the reset:
Highlight No and press ENTER.
To continue the reset process:
Highlight Yes and press ENTER. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the restore process.
Chapter 6: Setting up your TV
System Status
System Infomation
Navigate Select CH RTN Back EXIT Exit
System Information
Software Version
0.4.0
Mar 29 2005 - 10:44:39
FW:0.16
Sub:46
O K
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
41