Toshiba 40G300U Owner's Manual page 6

7) VESA Mounting Pattern
40" 200x200 mm M6
46" 400x200 mm M8
(unit in ram)
Removingthe Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leavethe stand protruding over the edge of the
surface.
Note: Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Remove the four screws shown in the right
diagram. This will allow removal of the pedestal
stand.
3) Onceyou have removed all four screws, holding
the pedestal stand in place, remove the pedestal
stand from the TV.
40" TV
VESA Mounting Pattern
!
Four screws..J_Ll J Hook
Sturdy strap
(as short as possible)
46" TV
VESA Mounting Pattern
i i
Four screws _"_L'___J Hook
Sturdy strap
(as short as possible)
CAUTION:Always place the TV on the floor or a sturdy,
level, stable surface that can support the weight of
the unit. To secure the TV,use a sturdy strap from
the hook(s) on the rearof the TV to a wall stud, pillar,
or other immovable structure. Make sure the strap is
tight, secure, and parallel to the floor.