Connectinga Vcrand Antenna, Cabletv Or Camcorder - Toshiba 40G300U Owner's Manual

Connectinga VCRand antenna, CableTV or Camcorder
TV hackpanel
From CaMe TV or FromCaMe TV
antenna _ 6a_
VIDEO 2 inputs
an TV right side panel
You will need:
,, coaxial cables
,, standardA/V cables
- If you have a mono VCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only.
® standardaudio cables (If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TV
To view the antenna or Cable signal:
Select the ANT/CABLE video input source on the TV.*
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLE video
input source oll the TV.* Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input
source on the TV.*
To view tile camcorder video:
Select the VIDEO2 video input source on the TV.*
,', To select the video input source, press INPUT on
the remote control (c:,_page 22). To program the
TV remote control to operate other devices, see
Chapter 3.
The unauthorized recording,use,distribution,or
revisionof televisionprograms, v ideotapes,DVDs,
and othermaterialsis prohibitedunderthe Copyright
Lawsof the UnitedStatesandothercountries,andmay
subjectyou to civil andcriminal liability.
14