Main Board Removal - Epson 610 Service Manual

EPSON Perfection 610

4.2.7 Main Board Removal

1. Release the Carriage Lock. (See Section 4.2.1.)
2. Remove the Document Cover. (See Section 4.2.2.)
3. Remove the Upper Housing. (See Section 4.2.3.)
4. Slide the Carriage Unit slowly until you see the whole main board
cover.
5. Remove the two screws (CBS, M3x4) securing the FFC fixing plate,
and then remove the FFC fixing plate.
6. Remove the three screws (gold, CBS, M3x4/M3x6), release the two
hooks at the rear edge, and then remove the main board cover.
Assembly and Disassembly
6. CBS Screw (M3x4)
Disassembly Procedures
6. Hooks
6. Main Board Cover
4. Carriage Unit
Figure 4-26. Main Board Removal (1)
Revision B
6. CBS Screws (M3x6)
5. CBS Screws (M3x4)
5. FFC Fixing Plate
38